Contents |
Casting Waxes
There are a wide variety of wax types used in the lost wax casting process. Lost-wax casting, sometimes called by the French name of cire perdue, is the process by which a bronze is cast from an artist's sculpture in industrial uses the modern process Generally they fall into three main types, soft, hard and injection waxes. Injection waxes are made and intended to be used for injecting wax under pressure into rubber or other types of molds. They can be carved and worked otherwise, but they are not specifically designed for that use. Their properties more often target good injection properties: flow, low shrinkage, pot life and etc.
Soft waxes are sometimes called sculpting waxes, and generally have a consistency resembling clay. Generally the techniques used in working soft waxes are similar to those used with clay and involve the use of wooden or metal spatulas, direct molding with the fingers and the like.
Carving Wax
Carving wax is a smooth, non-brittle wax designed for carving and/or machining. Wax has traditionally referred to a substance that is secreted by Bees ( Beeswax) and used by them in constructing their Although the formulas for most commercial waxes are proprietary and secret, most suppliers will say that the hard waxes are some blend or mix of waxes and plastics. Wax has traditionally referred to a substance that is secreted by Bees ( Beeswax) and used by them in constructing their Wax has traditionally referred to a substance that is secreted by Bees ( Beeswax) and used by them in constructing their Wax has traditionally referred to a substance that is secreted by Bees ( Beeswax) and used by them in constructing their Plastic is the general common term for a wide range of synthetic or semisynthetic organic solid materials suitable for the manufacture of industrial products In any case, this family of waxes has a hardness and consistency of plastic or softer wood. Wax has traditionally referred to a substance that is secreted by Bees ( Beeswax) and used by them in constructing their Plastic is the general common term for a wide range of synthetic or semisynthetic organic solid materials suitable for the manufacture of industrial products Wood is hard fibrous lignified structural tissue produced as secondary Xylem in the stems of Woody plants notably trees but also shrubs They can be cut or carved with knives, files and rotary or machine tools. To illustrate the usefulness of this type of wax, if one were to get a candle, mount it on a lathe and feed a tool into it, the wax would slough off like butter, stick to the tool and in general make a huge mess. Hard wax, on the other hand, will machine more like soft aluminum, giving fine edges and a fine finish if worked properly.
Wax Carving
It is obvious that the topic of wax carving is dependant on what item or object is being carved. The word "carved" is somewhat of a misnomer, too, because more often the wax is shaped using tools usually associated with machining: rotary tools, saws, files and burins or gravers. Burin from the French burin meaning "cold Chisel " has two specialised meanings for types of tools in English one meaning a Steel Actual knives can be used and most certainly are, but the hardness of the material is such that they are not the ideal tool, generally. One of the largest manufacturers of carving wax is Ferris, and their file-a-wax line comes in three hardness grades: blue is the softest, purple is next, and green is the hardest. The hardness is apparent in carving, but another factor in the grades is that the blue is somewhat flexible in thin section, while the green is not. The waxes come in a wide variety of shapes: blocks, sheets, rods and tubes, and in recent times there are even extruded shapes available. The rods are useful for lathe turning, among other things, and the tubes are useful for making rings in jewelry work. The tubes are available in various sizes, and also with a flat top, which is useful for signet rings.
This article does not presume to teach the subject of sculpting or carving in detail, but in general terms the proper size and shape of block or tube is chosen, in the preferred hardness, and cut to a rough size, as needed. Then the design is generally drawn or laid out on that, and saws, files or machine tools are used to work the wax into a finished product. The wax is easily taken to a fine finish in the end using a bit of nylon stocking or steel wool. After the wax product is finished, it may be molded or used in the lost wax casting process to create a final cast product. Lost-wax casting, sometimes called by the French name of cire perdue, is the process by which a bronze is cast from an artist's sculpture in industrial uses the modern process
External Links
- [1] Manufacturers of Ferris Waxes
Dapyx Software network: MP3 Explorer | Ebook Manager | Zenithic