Tracker action is a term used in reference to pipe organs to indicate a mechanical linkage between keys or pedals pressed by the organist and the valve that allows air to flow into pipe(s) of the corresponding note. The pipe organ is a Musical instrument that produces sound when pressurized air (wind is driven through a series of pipes, controlled by a keyboard This is in contrast to electrical or electro-pneumatic actions, which connect the key to the valve through an electrical link or an electrically assisted pneumatic system respectively.

History

Ancient History

Organs trace their history as far back as at least the 3rd Century B. The pipe organ is a Musical instrument that produces sound when pressurized air (wind is driven through a series of pipes, controlled by a keyboard C. with an organlike device known as the Hydraulis (also known as a water organ, and Roman organ, in which water was used as a source of power to push wind through organ pipes, not to be confused with the hydraulic action of a hydraulophone, an instrument that actually uses water to produce the sound, not just as a source of power). The water organ or hydraulic organ (early types are sometimes called hydraulis, hydraulos, hydraulus or hydraula) is a type of automatic Hydraulic action is a form of Mechanical weathering caused by the force of moving water currents rushing into a crack in the rockface The term hydraulophone refers to one of an interactive acoustic sound sculpture typically in the form of a civic centerpiece used in landscape architecture or While the control of air pressure was controlled by water pressure (hence the name), the action was a rudimental form of modern action.

It was not until the mid 14th century that the action needed to be explored and expanded as finally more pipes were added, as well as the addition of stops, and ultimately multiple cases and keyboards.

Baroque and Classical

This continued in the 17th and 18th centuries. No particularly great developments took place in the Classical Period. The dates of the Classical period in Western music are generally accepted as 1750 to 1810

Romantic

In the Romantic Period came a new style of organ building. Romantic Music is a Musicological term referring to a particular period theory compositional practice and canon in European music history from about 1815 to 1910 The organ became larger and louder and pneumatically assisted action became the norm in large instruments, to offset the extreme key weight caused by high wind pressures.

Today

Today, the best organs are still built using the principles of the tracker action. Some active builders of tracker action organs include: 'Taylor and Boody' (builder's website) of Staunton, Virginia, 'Paul Fritts' (builder's website) of Tacoma, Washington, 'Flentrop Orgelbouw B. Paul Fritts an American organ builder based in Tacoma WA who following historical models has created over twenty mechanical action instruments that have contributed to the V. ' (builder's website) of Zaandam, Holland, and 'C. B. Fisk, Inc. CB Fisk Inc is a Gloucester, Massachusetts, USA based company that is involved in the manufacturing and service of organs. ' (builder's website)of Gloucester, MA.

Currently, the world's Largest Mechanical Tracker Action Organic is in the Concert Hall of the Sydney Opera House, Sydney, Australia and includes over 10,500 pipes. The Sydney Opera House is located in Sydney New South Wales, Australia Sydney (ˈsɪdniː is the most populous city in Australia, with a Metropolitan area population of approximately 4 For a topic outline on this subject see List of basic Australia topics.

Components of the Action

A roller board with rollers and trackers from a 1970 D. A. Flentrop organ

The action consists of many types of devices used for the playing of such said organ, as listed below:

• Trackers – trackers are the portions of the action used to make a pulling motion. Trackers can be used over long distances.
• Stickers – used for a pushing motion; often paired with trackers. Their length is limited by the material, though most of the time, capping off at about 10 inches.
• Levers – levers are used to transfer from a tracker (pulling) to a sticker (pushing), or a general change of direction, or both.
• Backfalls – backfalls are used for motion over a small or short distance where trackers and stickers would be otherwise illogical to use. As a natural result, the motion also changes direction.
• Squares – a specific type of lever commonly used in organs which is at a right (90°) angle. Squares can also come in a “T” shape and form.
• Roller – used for parallel direction in vertical or horizontal motion by use of rotating or rolling the round instrument with small levers on each end enabling such said motion.
• Roller board – location upon which rollers are attached (note: rollers are often used densely in one section of the action and so are often closely associated with the roller board. )
• Stops – knobs which indirectly control the flow of air over certain ranks of pipes. They are activated with a pulling motion by hand, and deactivated (or stopped) by pushing them shut.
• Trundle – Trundles are used as a substitute for levers in the action associated with the Stops and Slider boards.

The above is a list of mechanisms unique to tracker action. For actions used in all forms of pipe organs see pipe organ construction. The pipe organ is a Musical instrument that produces sound when pressurized air (wind is driven through a series of pipes, controlled by a keyboard

Tracker action and other kinds of action

Tracker action is the most artistically successful type of action. Two other kinds of action used in pipe organs are as follows:

• Electric action in which electric valves are used to allow wind into the pipes;
• Pneumatic action in which compressed air is used to control valves that allow wind into the pipes;

Advantages and disadvantages

Currently, some organ builders use tracker action in new organs, others use electric action, and still others use either type depending on the instrument. There are builders and organists who have strong feelings regarding the advantages of one type of action over another.

Advantages of tracker action

• Tracker action gives the organist more control over the exact moment air enters the pipe (i. e. more exact)
• This control extends to actually being able to affect the attack and release of a note through different touch - before the invention of electric action, the organ was a touch sensitive instrument.

Disadvantages of tracker action

• The console or keydesk (where the organist actually plays) cannot be moved. The Pipe organ is played from an area called the console, which holds the manuals pedals and stop controls
• On some instruments, as more stops are used, the organist must apply more pressure/force to a key in order for it to play, resulting in heavy playing action when playing full organ. This can be particularly burdensome when two or more manuals are coupled. Problems of heavy action, however, can almost always be overcome through correct use of body weight.