Reverberation is the persistence of sound in a particular space after the original sound is removed. Sound' is Vibration transmitted through a Solid, Liquid, or Gas; particularly sound means those vibrations composed of Frequencies When sound is produced in a space, a large number of echoes build up and then slowly decay as the sound is absorbed by the walls and air, creating reverberation, or reverb. In Audio signal processing and Acoustics, an echo (plural echoes) is a reflection of sound arriving at the listener some time after the direct This is most noticeable when the sound source stops but the reflections continue, decreasing in amplitude, until they can no longer be heard. Amplitude is the magnitude of change in the oscillating variable with each Oscillation, within an oscillating system Large chambers, especially such as cathedrals, gymnasia, indoor swimming pools, large caves, etc. A swimming pool, swimming bath, wading pool, or simply a pool, is an artificially enclosed Body of water intended for Swimming or , are examples of spaces where the reverberation time is long and can clearly be heard. Different types of music tend to sound best with reverberation times appropriate to their characteristics. Reverberation is the persistence of Sound in a particular space after the original sound is removed

(Compare with echo: "If so many reflections arrive at a listener that he or she is unable to distinguish between them, the proper term is reverberation. In Audio signal processing and Acoustics, an echo (plural echoes) is a reflection of sound arriving at the listener some time after the direct ")

Short sample of reverberation effect

Clean signal, followed by different versions of reverberation (with longer and longer decay times).

Problems listening to the file? See media help.

Reverberation Time

RT₆₀ is the time required for reflections of a direct sound to decay by 60 dB below the level of the direct sound. The decibel ( dB) is a logarithmic unit of measurement that expresses the magnitude of a physical quantity (usually power or intensity relative to Reverberation time is defined for wide band signals. When talking about the decay of an individual frequency, the term decay time is used.

In the late 19th century, Wallace Clement Sabine started experiments at Harvard University to investigate the impact of absorption on the reverberation time. The 19th century of the Common Era began on January 1, 1801 and ended on December 31, 1900, according to the Gregorian calendar Wallace Clement Sabine ( June 13[[ 868]] - January 10[[ 919]] was an American Physicist who founded the field of Architectural acoustics Using a portable wind chest and organ pipes as a sound source, a stopwatch and his ears he measured the time from interruption of the source to inaudibility (roughly 60dB). A stopwatch is a handheld Timepiece designed to measure the amount of time elapsed from a particular time when activated to when the piece is deactivated He found that the reverberation time is proportional to the dimensions of room and inversely proportional to the amount absorption present.

The optimum reverberation time for a space in which music is played depends on the size of the room and depend on the material to be produced in the space. Rooms for speech require a shorter reverberation time than for music as a longer reverberation time can make it difficult to understand speech. If the reverberation time from one syllable over laps the next syllable, it may make it difficult to identify the word [1]. A syllable ( Greek:) is a unit of organization for a sequence of speech sounds "Cat", "Cab", and "Cap" may all sound very similar. If on the other hand the reverberation time is too short, tonal balance and loudness may suffer. Reverberation effects are often used in studios to add depth to sounds. A recording studio is a facility for sound recording. Ideally the space is specially designed by an acoustician to achieve the desired acoustic properties (sound It is a popular misconception that reverb is used on vocal recordings to correct inaccuracies in pitch, there is specialist software such as Melodyne for correcting pitch. Reverb is purely a creative effect that should never be used correctively.

Basic factors that affect a room's reverberation time include the size and shape of the enclosure as well as the materials used in the construction of the room. Reverberation is the persistence of Sound in a particular space after the original sound is removed Every object placed within the enclosure can also affect this reverberation time, including people and their belongings.

The Sabine Equation

Sabine's reverberation equation was developed in the late 1890s in an empirical fashion. A central concept in Science and the Scientific method is that all Evidence must be empirical, or empirically based that is dependent on evidence He established a relationship between the RT₆₀ of a room, its volume, and its total absorption (in sabins). The Sabin is defined as a unit of sound absorption. One square meter of 100% absorbing material has a value of one metric Sabin This is given by the equation:

.

where c is a mathematical constant measuring 0. 161, V is the volume of the room in m³, S total surface area of room in m², a is the average absorption coefficient of room surfaces, and Sa is the total absorption in sabins.

The total absorption in sabins (and hence reverberation time) generally changes depending on frequency (dependent on the which is defined by the acoustic properties of the space), and that the equation does not take into account room shape or dimensions, nor losses from the sound travelling through the air (important in larger spaces). Acoustics is the interdisciplinary science that deals with the study of Sound, Ultrasound and Infrasound (all mechanical waves in gases liquids and solids In general most rooms absorb less in the lower frequencies, causing a longer decay time.

The reverberation time RT₆₀ and the volume V of the room have great influence on the critical distance d_c (conditional equation):

where critical distance r_H is measured in metres, volume V is measured in m³, and reverberation time RT₆₀ is measured in seconds. The volume of any solid plasma vacuum or theoretical object is how much three- Dimensional space it occupies often quantified numerically Critical distance is in Audio Physics, the distance at which the Sound pressure level of the direct and the reverberant sound fields are equal The metre or meter is a unit of Length. It is the basic unit of Length in the Metric system and in the International The second ( SI symbol s) sometimes abbreviated sec, is the name of a unit of Time, and is the International System of Units

Absorption

The absorption coefficient of a material is a number between 0 and 1 which indicates the proportion of sound which is absorbed by the surface compared to the proportion which is reflected back into the room. A large, fully open window would offer no reflection as any sound reaching it would pass straight out and no sound would be reflected. This would have an absorption coefficient of 1. Conversely, a thick, smooth painted concrete ceiling would be the acoustic equivalent of a mirror, and would have an absorption coefficient very close to 0.

Measurement of Reverberation Time

Historically reverberation time could only be measured using a level recorder (a plotting device which graphs the noise level against time on a ribbon of moving paper). A loud noise is produced, and as the sound dies away the trace on the level recorder will show a distinct slope. Analysis of this slope reveals the measured reverberation time. Some modern digital sound level meters can carry out this analysis automatically. Sound level meters measure sound pressure level and are commonly used in Noise pollution studies for the quantification of almost any noise but especially for industrial

Two basic methods exist for creating a sufficiently loud noise (which must have a defined cut off point). Impulsive noise sources such as a blank pistol shot, or balloon burst may be used to measure the impulse response of a room. Alternatively, a random noise signal such as pink noise or white noise may be generated through a loudspeaker, and then turned off. This is known as the interrupted method, and the measured result is known as the interrupted response.

Reverberation time is often given as a measurement of decay time. Decay time is the time it takes the signal to diminish 60 dB below the original sound.

Creating Reverberation Effects

It is often desirable to create a reverberation effect for recorded or live music. A number of systems have been developed to facilitate or simulate reverberation.

Chamber reverberators

The first reverb effects created for recordings used a real physical space as a natural echo chamber. When used literally the term echo chamber refers to a hollow enclosure used to produce echoing sounds usually for recording purposes A loudspeaker would play the sound, and then a microphone would pick it up again, including the effects of reverb. For the Marty Friedman album see Loudspeaker (album A loudspeaker, speaker, or speaker system is an electroacoustical Whilst this is still a common technique, it requires a dedicated soundproofed room, and varying the reverb time is difficult.

Plate reverberators

A plate reverb system uses an electromechanical transducer, similar to the driver in a loudspeaker, to create vibration in a large plate of sheet metal. A transducer is a device usually electrical, electronic, Electro-mechanical, Electromagnetic, Photonic, or Photovoltaic Sheet metal is simply Metal formed into thin and flat pieces It is one of the fundamental forms used in Metalworking, and can be cut and bent into a variety A pickup captures the vibrations as they bounce across the plate, and the result is output as an audio signal. A pickup device acts as a Transducer that captures mechanical vibrations (usually from suitably equipped Stringed instruments such as the Electric guitar

Spring reverberators

A spring reverb system uses a transducer at one end of a spring and a pickup at the other, similar to those used in plate reverbs, to create and capture vibrations within a metal spring. A spring is a flexible elastic object used to store mechanical Energy. Guitar amplifiers frequently incorporate spring reverbs due to their compact construction and low cost. A guitar amplifier is an Electronic amplifier designed for use with an electric or electronic Musical instrument, such as an Electric guitar. Spring reverberators were once widely used in semi-professional recording due to their modest cost and small size.

Many musicians have made use of spring reverb units by rocking them back and forth, creating a thundering, crashing sound caused by the springs colliding with each other. The Hammond Organ included an inbuilt spring reverberator, making this a popular effect when used in a rock band. The Hammond organ is an electric organ which was invented by Laurens Hammond in 1934 and manufactured by the Hammond Organ Company

Digital reverberators

Digital reverberators use various signal processing algorithms in order to create the reverb effect. Digital signal processing ( DSP) is concerned with the representation of the signals by a sequence of numbers or symbols and the processing of these signals Since reverberation is essentially caused by a very large number of echoes, simple DSPs use multiple feedback delay circuits to create a large, decaying series of echoes that die out over time. Delay is an Audio effect which records an input signal to an audio storage medium, and then plays it back after a period of time More advanced digital reverb generators can simulate the time and frequency domain responses of real rooms (based upon room dimensions, absorption and other properties). In real music halls, the direct sound always arrives at the listeners ear first because it follows the shortest path. Shortly after the direct sound, the reverberant sound arrives. The time between the two is called the 'arrival time gap'. This gap is important in recorded music because it is the cue that gives the ear information on the size of the hall, better digital reverbs can incorporate this arrival time gap and hence sound more realistic.

Convolution Reverb

Main article: Convolution reverb

External links

• Reverberation - Hyperphysics

See also

• Convolution reverb
• Decay
• String resonance