A sample floor plan for a single-family home

A plan is an orthographic projection of a 3-dimensional object from the position of a horizontal plane through the object. Graphical projection is a Protocol by which an image of an imaginary three-dimensional object is projected onto a planar surface without the aid of mathematical calculation Planar projections are the subset of 3D graphical projections constructed by linearly mapping points in three dimensional space to points on a two-dimensional projection plane Perspective (from Latin perspicere to see through in the graphic arts such as drawing is an approximate representation on a flat surface (such as paper of an image as it is perceived Orthographic projection is a means of representing a three- Dimensional (3D object in two dimensions (2D Orthographic projection is a means of representing a three- Dimensional (3D object in two dimensions (2D A floor plan ( floorplan) in Architecture and Building engineering is a Diagram, usually to scale, of the relationships between rooms In Geometry, a cross section is the intersection of a body in 2-dimensional space with a line or of a body in 3-dimensional space with a plane etc An elevation is an Orthographic projection of a 3-dimensional object from the position of a horizontal plane beside an object An auxiliary view is an angle at which one can view an object that is not one of the primary views for an Orthographic projection. Axonometric projection ("to measure along axes" is a technique used in orthographic pictorials Isometric projection is a form of Graphical projection —more specifically an Axonometric projection. Dimetric projection is a form of Axonometric projection, in which its direction of viewing is such that two of the three axes of space appear equally foreshortened of which Trimetric projection is a form of Axonometric projection, where the direction of viewing is such that all of the three axes of space appear unequally foreshortened This article discusses imaging of three-dimensional objects For an abstract mathematical discussion see Projection (linear algebra. The cavalier perspective, also called cavalier projection or high view point, is a way to represent a three dimensional object on a flat drawing and more specifically Cabinet projection or sometimes cabinet perspective is a type of Oblique projection. 3D projection is any method of mapping three-dimensional points to a two-dimensional plane Owned by Atlassian Software Systems, FishEye is a Revision control browser and search engine Stereoscopy, stereoscopic imaging or 3-D (three-dimensional imaging is any technique capable of recording three-dimensional visual Anamorphosis is a distorted projection or perspective requiring the viewer to use special devices or occupy a specific vantage point to reconstitute the image A map projection is any method of representing the Surface of a sphere or other shape on a plane. A bird's-eye view is a View of an object from above as though the observer were a Bird, often used in the making of Blueprints, Floor plans Top-down perspective, also sometimes referred to as bird's-eye view, overhead view or helicopter view, A worm's-eye view is a View of an object from below as though the observer were a Worm. Orthographic projection is a means of representing a three- Dimensional (3D object in two dimensions (2D In other words, a plan is a section viewed from the top. In Geometry, a cross section is the intersection of a body in 2-dimensional space with a line or of a body in 3-dimensional space with a plane etc In such views, the portion of the object in above the plane is omitted to reveal what lies beyond. In the case of a floor plan, the roof and upper portion of the walls may be omitted. A floor plan ( floorplan) in Architecture and Building engineering is a Diagram, usually to scale, of the relationships between rooms

Roof plans are orthographic projections, but they are not sections as their viewing plane is outside of the object.

A plan is a common method of depicting the internal arrangement of a 3-dimensional object in two dimensions. It is often used in technical drawing and is traditionally crosshatched. A technical drawing is a form of graphic communication This type of Drawing is used in the transforming of an idea into physical form The style of crosshatching indicates the type of material the section passes through.

See also

• Descriptive geometry
• Graphical projection
• Orthographic projection
• Plans (drawings)