Mountain biking entails the sport of riding bicycles off-road, often over rough terrain, whether riding specially equipped mountain bikes or hybrid road bikes. Sport is an Activity that is governed by a set of rules or Customs and often engaged in competitively The bicycle, cycle, or bike is a pedal-driven, human-powered vehicle with two wheels attached to a frame, one behind A mountain bike or mountain bicycle (abbreviated MTB or ATB (all terrain bicycle is a Bicycle designed for off-road cycling including Most mountain bikes share similar characteristics that underscore durability and performance in rough terrain: wide, knobby tires, large, round frame tubing, front fork or dual suspension (aka shock absorbers). A bicycle frame is the main component of a Bicycle, onto which wheels and other components are fitted The durability factor means a far heavier bicycle weight to rider ratio than their road touring cousins. ^[1]

Mountain biking is roughly broken down into four categories: cross country, downhill, freeride, and trials/street riding. Cross-country ( XC) cycling is the most common discipline of Mountain biking. Downhill biking ( DH) is a Gravity -assisted Time trial Mountain biking event For other uses see Free ride (disambiguation Freeride is a relatively new discipline of Mountain biking, combining different Bike trials is a form of Mountain biking derived from Motorcycle trials. Each has differing levels of safety-consciousness with different types of mountain bikes and riding gear.

This individual sport requires endurance, bike handling skills and self-reliance, and can be performed almost anywhere from a back yard to a gravel road, but the majority of mountain bikers ride off-road trails, whether country back roads, fire roads, or singletrack (narrow trails that wind through forests, mountains, deserts, or fields). XCRacerjpg|thumb|A cross-country rider on singletrack during a race]] Single track or singletrack is narrow Mountain biking trail that is approximately There are aspects of mountain biking that are more similar to trail running than regular bicycling. Trail running or skyrunning is a variant on Running that differs markedly from Road running and Track running. Cycling is the use of Bicycles or - less commonly - Unicycles Tricycles Quadricycles and other similar wheeled Human powered vehicles Because riders are often far from civilization, there is a strong ethic of self-reliance in the sport. Riders learn to repair their broken bikes or flat tires to avoid being stranded miles from help. This reliance on survival skills accounts for the group dynamics of the sport. Club rides and other forms of group rides are common, especially on longer treks.

Contents 1 History of mountain biking 2 Equipment 3 Types of mountain biking 4 Advocacy 5 Environmental impacts of mountain biking 6 See also 7 References 8 External links

History of mountain biking

Bicycles have been ridden off-road since their invention. However, the modern sport of mountain biking primarily originated in the 1970s . There were several groups of riders in different areas of the U. S. A. who can make valid claims to playing a part in the birth of the sport. Riders in Crested Butte, Colorado and Cupertino, California tinkered with bikes and adapted them to the rigors of off-road riding. Crested Butte is a Home Rule Municipality in Gunnison County, Colorado, United States. Cupertino (ˌkuːpɚˈtiːnoʊ is a Suburban city in Santa Clara County, California, U Other riders around the country were probably copying their friends with motorcycles and riding their bikes on trails and fire roads. However, a group in Marin County, California is recognized by the Mountain Bike Hall of Fame to have played a central role in the birth of the sport as we know it today. March 11, 1889 | They began racing down Mount Tamalpais (Mt Tam) on old 1930s and '40s Schwinn bicycles retrofitted with better brakes and fat tires. Mount Tamalpais (tæməlˈpaɪəs MWCD, known locally as "Mount Tam" is a peak in Marin County, California, USA, often The Schwinn Bicycle Company was founded by Ignaz Schwinn in Chicago in 1895 and became the dominant manufacturer of American Bicycles through This group included Joe Breeze, Otis Guy, Gary Fisher, and Keith Bontrager, among others. Joe Breeze (born 1953 is a bicycle designer and bicycling advocate Gary Christopher Fisher (born 1950 is considered one of the inventors of the modern Mountain bike. Keith Bontrager (born December 18, 1954) is a successful Motorcycle racer turned pioneer in the development of the modern Mountain bike. It was Joe Breeze who built the first new, purpose-made mountain bike in 1977. Tom Ritchey built the first regularly available mountain bike frame, which was accessorized by Gary Fisher and Charlie Kelly and sold by their company called MountainBikes (later changed to Fisher Mountain Bikes then bought by Trek, still under the name Gary Fisher). Tom Ritchey (born 1956) is a master Bicycle frame builder designer Welder and founder of Ritchey Design Charlie Kelly (Charles Richard Kelly born 1945 was an early pioneer in the development of modern mountain bicycles Trek Bicycle Corporation is the United States ' largest Bicycle manufacturer, distributing bicycles and cycling products under the Trek Gary Fisher The first two mass produced mountain bikes were sold in 1982: the Specialized Stumpjumper and Univega Alpina Pro.

In 1988, the Mountain Bike Hall of Fame was founded to chronicle the history of mountain biking, and to recognize the individuals and groups that have contributed significantly to this sport. The Mountain Bike Hall of Fame and Museum is located in Crested Butte Colorado.

Equipment

Main article: Mountain bike

• Mountain bikes differ from road touring bicycles in several ways. A mountain bike or mountain bicycle (abbreviated MTB or ATB (all terrain bicycle is a Bicycle designed for off-road cycling including A racing bicycle is a Bicycle designed for road cycling according to the rules of the Union Cycliste Internationale (UCI They have a smaller, reinforced frame, knobby, wide and high profile tires which are mounted on a rim that is stronger than a standard bicycle rim, a larger range of gears to facilitate climbing up steep hills and over obstacles, a wider flat or upwardly-rising handlebar that allows a more upright riding position, and often some form of suspension system for either the front wheel or both wheels. Shimano xt rear derailleurjpg|right|thumb|Shimano XT rear derailleur on a mountain bike]]The gearing on a Bicycle is the selection of appropriate gear ratios for optimum efficiency Handlebars usually refer to the steering mechanism for Bicycles Motorcycles ATVs Snowmobiles and personal watercraft; the equivalent The inherent comfort and flexibility of the modern mountain bike has led to an estimated 80% market share in the United States, United Kingdom, Canada, Australia and New Zealand and others. The United States of America —commonly referred to as the The United Kingdom of Great Britain and Northern Ireland, commonly known as the United Kingdom, the UK or Britain,is a Sovereign state located Country to "Dominion of Canada" or "Canadian Federation" or anything else please read the Talk Page For a topic outline on this subject see List of basic Australia topics. New Zealand is an Island country in the south-western Pacific Ocean comprising two main landmasses (the North Island and the South Island Mountain bikes often come with disc brakes similar to those used in automobiles, rather than rim brakes used on road bikes. The disc brake or disk brake is a device for slowing or stopping the rotation of a Wheel. Bicycle brake systems are used to slow down or Brake a Bicycle.
• Bicycle pedals vary from simple platform pedals, where the rider simply places the shoes on top of the pedals, to clipless, where the rider uses a specially equipped shoe with a sole that engages mechanically into the pedal. A bicycle Pedal is the part of a Bicycle that the rider pushes with his or her foot to propel the bicycle Pedals with cages are rarely used, as the rough terrain (whether rock or tree roots and branches) can easily catch a cage and cause the rider to fall.
• Helmets provide mandatory head protection, as falls can occur over rough, rocky, sandy, or mountainous terrain. Helmets include full-faced helmets or regular streamline.
• Gloves differ from road touring gloves, are made of heavier construction, and often have covered thumbs or all fingers covered for hand protection. They are sometimes made with high-impact Kevlar and carbon fiber knuckles. Kevlar is the registered Trademark for a light strong para-aramid Synthetic fiber, related to other Aramids such as Nomex and
• Glasses, lightweight cycling, help protect against debris while on the trail. Filtered lenses, whether yellow for cloudy days or shaded for sunny days, protect the eyes from strain. Glasses are available with interchangeable lenses.
• Shoes are chosen for their comfort and ability to withstand backcountry terrain, whether used with clipless pedals or not.
• Clothing is chosen for comfort during physical exertion in the backcountry, and its ability to withstand rough terrain. Road touring clothes are often inappropriate due to their delicate fabrics and construction.
• Hydration systems are imperative for mountain bikers in the backcountry, ranging from simple water bottles to toteable water bags with drinking tubes in lightweight backpacks (e. g. , Camelbaks).
• Pump to inflate flat tires.
• Bike tools and extra bike tubes are important, as mountain bikers frequently find themselves miles from help (where their cell phones don't work), with flat tires or other mechanical problems (e. g. , chainsuck) that must be handled by the rider.

Body armor Similar to the armor worn on motorcross bikes. These can consist of knee pads, elbow pads, padded shorts or armored under jackets. Body armor provides an extra layer of protection. These are made by companies like Dainese, sixsixone, Alpinestars and many others

Types of mountain biking

Mountain biking is dominated by these four major categories:

• Cross-Country (XC) is the most popular form of mountain biking, and the standard for most riders. Cross-country ( XC) cycling is the most common discipline of Mountain biking. It generally means riding point-to-point or in a loop including climbs and descents on a variety of terrain. A typical XC bike weighs around 25-30 lbs, and has 0-4 inches of suspension travel front and sometimes rear. Some XC riders aspire to XC racing, which is even more physically demanding than regular XC, and like all sports at an elite level requires years of training to compete at a national level.

• Dirt Jumping (DJ) is one of the names given to the practice of riding bikes over shaped mounds of dirt or soil and becoming airborne. Dirt jumping is one of the names given to the practice of riding bikes over cement type jumps of dirt or soil and becoming airborne The idea is that after riding over the 'take off' the rider will become momentarily airborne, and aim to land on the 'landing'. Dirt jumping can be done on almost anything with wheels, but it is usually executed on a bicycle. tricks e. g backflips are performed in the air as well.

• Downhill (DH) is, in the most general sense, riding mountain bikes downhill. Downhill biking ( DH) is a Gravity -assisted Time trial Mountain biking event The rider usually travels to the point of descent by other means than cycling, such as a ski lift or automobile, as the weight of the downhill mountain bike often precludes any serious climbing. While cross country riding inevitably has a downhill component, Downhill (or DH for short) usually refers to racing-oriented downhill riding. Downhill-specific bikes are universally equipped with front and rear suspension, large disc brakes, and use heavier frame tubing than other mountain bikes. Because of their extremely steep terrain (often located in summer at ski resorts), downhill courses are one of the most physically demanding and dangerous venues for mountain biking. They include large jumps (up to and including 40 feet), drops of 10+ feet, and are generally rough and steep top to bottom. To negotiate these obstacles at race speed, racers must possess a unique combination of total body strength, aerobic and anaerobic fitness, and mental control. Minimum body protection in a true downhill setting is knee pads and a full face helmet with goggles, although riders and racers commonly sport full body suits to protect themselves. Downhill bikes now weigh around 35 -40 lbs, while professional downhill mountain bikes can weigh as little as 33 lbs, fully equipped with custom carbon fibre parts, air suspension tubeless tires and more. Downhill frames get anywhere from 7 to 10 inches of travel and are usually mounted with an 8 inch travel dual-crown fork.

• Freeride / Big Hit. For other uses see Free ride (disambiguation Freeride is a relatively new discipline of Mountain biking, combining different Freeride, as the name suggests is a 'do anything' discipline that encompasses everything from downhill racing (see below) without the clock to jumping, riding 'North Shore' style (elevated trails made of interconnecting bridges and logs), and generally riding trails and/or stunts that require more skill and aggressive techniques than XC. Freeride bikes are generally heavier and more amply suspended than their XC counterparts, but usually retain much of their climbing ability. It is up to the rider to build his or her bike to lean more toward a preferred level of aggressiveness. "Slopestyle" type riding is an increasingly popular genre that combines big-air, stunt-ridden freeride with BMX style tricks. Slopestyle courses are usually constructed at already established mountain bike parks and include jumps, large drops, quarter-pipes, and other wooden obstacles. There are always multiple lines through a course and riders compete for judges' points by choosing lines that highlight their particular skills. A "typical" freeride bike is hard to define, but 30-40 lbs with 4-7 inches of suspension front and rear is a good generalization.

• Trials riding consists of hopping and jumping bikes over obstacles. Bike trials is a form of Mountain biking derived from Motorcycle trials. It can be performed either off-road or in an urban environment. It requires an excellent sense of balance. As with Dirt Jumping and BMX-style riding, emphasis is placed on style, originality and technique. Trials bikes look almost nothing like mountain bikes. They use either 20", 24" or 26" wheels and have very small, low frames, some types without a saddle.

• Short Cross or Speed Cross (SC) is the newest form of mountain biking. The idea is to ride short, narrow forest paths with rocks, roots and dints, but not necessarily any ramps on them. The optimal length of the paths are from a few tens to hundreds of meters. The shortness is to provide extreme speed and thrilling to get trough the hindrances as fast as possible without crashing. The altitude of the paths does not have to vary much. The ultimate direction of the paths from vertical aspect can be the both ways, either up or down. The transitions between these essential parts are to be taken lightly and stopping at the beginning of every path is to provide maximum amount of thrilling action gained through the speed. The bikes for this purpose can vary from XC to FR.

Advocacy

Mountain bikers have faced land access issues from the beginnings of the sport. Areas where the first mountain bikers have ridden have faced serious restrictions or elimination of riding.

Many trails were originally fireroads, animal paths, hiking trails, or multi-use paths that were simply used for these new trail users. A firebreak (also called a fireroad, fire line or fuel break) is a gap in Vegetation or other combustible material that acts as a barrier to Single-track mountain biking creates more conflict with hikers, particularly in forested areas. There is also some concern single-track biking leads to erosion. Because of these conflicts, the interpretation of the Wilderness Act was revised by the National Park Service to be able to exclude bicycles in certain areas.

Opposition to the sport has led to the development of local, regional, and international mountain bike groups. The different groups that formed generally work to create new trails, maintain existing trails, and help existing trails that may have issues. Groups work with private and public entities from the individual landowner to city parks departments, on up through the state level at the DNR, and into the federal level. Different groups will work individually or together to achieve results.

Advocacy organizations work through a variety of means including education, trail work days, and trail patrols. Examples of the education an advocacy group can provide include: Educate local bicycle riders, property managers, and other user groups on the proper development of trails, and on the International Mountain Bicycling Association's rules of the Trail. The International Mountain Bicycling Association ( IMBA) is a Non-profit educational association whose mission is to create enhance and preserve trail opportunities Examples of trail work days can include: Flagging, cutting, and signing a new trail, or removing downed trees after a storm. A trail patrol is a bike rider who has had some training to help assist other (including non cyclists) trail users.

The International Mountain Bicycling Association, or IMBA, is a non-profit advocacy group whose mission is to create, enhance and preserve trail opportunities for mountain bikers worldwide. IMBA serves as an umbrella organization for mountain biking advocacy worldwide, and represents more than 700 affiliated mountain biking groups. In 1988, five California mountain bike clubs linked to form IMBA. The founding clubs were: Concerned Off Road Bicyclists Association, Bicycle Trails Council East Bay, Bicycle Trails Council Marin, Sacramento Rough Riders, and Responsible Organized Mountain Pedalers.

Environmental impacts of mountain biking

Studies reported in the IMBA (International Mountain Bike Association) Trail Solutions manual found that a mountain bike's impact is comparable to that of a hiker and substantially less than that of an equestrian. Marvin Braude Mulholland Gateway Park is a 1500 acre park in the Santa Monica Mountains with its trailhead at the southern terminus of Reseda Boulevard in Tarzana The International Mountain Bicycling Association ( IMBA) is a Non-profit educational association whose mission is to create enhance and preserve trail opportunities For the Roman class see Equestrian (Roman Equestrianism refers to the skill of riding or driving Horses This broad description ^[2]

Studies that find mountain biking has little environmental impact have been criticized as underestimating the real impact of mountain biking on the environment. In 2003, Jason Lathrop wrote a critical literature review on the ecological impacts of mountain biking, raising some questions found nowhere else. He quotes the BLM: "An estimated 13. 5 million mountain bicyclists visit public lands each year to enjoy the variety of trails. What was once a low use activity that was easy to manage has become more complex". He also notes that few studies take mountain biking into account.

The environmental impacts of mountain biking can be greatly reduced by not riding on muddy or sensitive trails, not skidding or locking the rear wheel when braking and by staying on the trail.

See also

• Mountain bike racing
• International Mountain Bicycling Association
• NORBA
• Union Cycliste Internationale
• Bike trials riding
• Bike path
• Bunny hop (cycling)
• List of professional mountain bikers

References

• The Socorro Country Fat Tire Trail Book, The Socorro Fat Tire Committee in association with the Socorro County Chamber of Commerce, Socorro County Chamber of Commerce, Socorros, New Mexico, 1993, stapled paperback pamphlet, ISBN 0-88307-712-4, See Socorro County, New Mexico

External links

• Mountain biking at the Open Directory Project

Socorro County is a County located in the US state of New Mexico, United States. The Open Directory Project ( ODP) also known as dmoz (from directory

---

© 2009 citizendia.org; parts available under the terms of GNU Free Documentation License, from http://en.wikipedia.org
Dapyx Software network: MP3 Explorer | Ebook Manager | Zenithic