Horsepower (hp or HP^[1]) is the name of several non-metric units of power. In Physics, power (symbol P) is the rate at which work is performed or energy is transmitted or the amount of energy required or expended for In scientific discourse, the term "horsepower" is rarely used because of its various definitions and the already existent SI unit for power, the watt (W). The watt (symbol W) is the SI derived unit of power, equal to one Joule of energy per Second. However, use of the term "horsepower" persists as a legacy in many languages and industries, particularly as a units of measurement of the maximum power output of internal-combustion engines of automobiles; and often of trucks, buses, and ships. The internal combustion engine is an engine in which the Combustion of Fuel and an Oxidizer (typically air occurs in a confined space called a A ship /ʃɪp/ is a large vessel that floats on water Ships are generally distinguished from Boats based on size The use of 'HP' is being slowly replaced by kW (kilowatt) and MW (megawatt). The watt (symbol W) is the SI derived unit of power, equal to one Joule of energy per Second. The watt (symbol W) is the SI derived unit of power, equal to one Joule of energy per Second.

There are two important factors to consider when evaluating the measurement of "horsepower":

• The inconsistent definitions of the "horsepower" unit itself
• The various standards used in measuring the value of "horsepower"

These factors can be combined in unexpected ways — the power output for an engine rated at "100 horsepower" might not be what a reader expects. For this reason, various groups have attempted to standardize not only the definition of "horsepower" but the measurement of "horsepower". In the interim, more confusion may surface.

Contents 1 Current definitions 1.1 Mechanical horsepower 1.2 Metric horsepower 1.2.1 PS 1.2.2 pk, hk and hv 1.2.3 CV and cv 1.2.4 ch 1.3 Boiler horsepower 1.4 Electrical horsepower 1.5 Relationship with torque 1.6 Drawbar horsepower 1.7 RAC horsepower (taxable horsepower) 2 Measurement 2.1 Nominal horsepower 2.2 Indicated horsepower 2.2.1 SAE gross horsepower 2.3 Brake horsepower 2.3.1 hp (SAE) 2.3.2 SAE-certified horsepower 2.3.3 hp (DIN) 2.3.4 hp (ECE) 2.3.5 9768-EC 2.3.6 ISO 14396 2.4 Shaft horsepower 2.5 Effective horsepower / true horsepower / wheel horsepower 3 History of the term "horsepower" 3.1 Horsepower from a horse 4 References 5 External links

Current definitions

The following definitions have been widely used:

Mechanical horsepower	≡ 33,000 ft·lbf/min = 550 ft·lbf/s = 745. This article deals with the unit of force For the unit of mass see Pound (mass. 69987158227022 W (exactly)
Metric horsepower	≡ 75 kgf·m/s = 735. The watt (symbol W) is the SI derived unit of power, equal to one Joule of energy per Second. The unit kilogram-force ( kgf, often incorrectly just kg) or kilopond ( kp) is defined as the Force exerted by Earth's gravity 49875 W (exactly)
Electrical horsepower	≡746 W
Boiler horsepower	≡ 33,475 Btu/h =9809. 5 W
Hydraulic horsepower	=Flow Rate(US gal/min) * Pressure(psi) / 1714

Hydraulic horsepower is equivalent to mechanical horsepower. A gallon is a measure of Volume. It is in current use in the United States and still has limited use in many other English-speaking countries A minute is a Unit of measurement of Time or of Angle. The minute is a unit of Time equal to 1/60th of an Hour or 60 The pound per square inch or more accurately pound-force per square inch (symbol psi or lbf/in² or lbf/in²) is a unit of The formula given above is for conversion to mechanical horsepower from the factors acting on a hydraulic system.

Additionally, the term "horsepower" has been applied to calculated (estimated rather than measured) metrics:

• RAC horsepower is based solely on the dimensions of a piston engine (1 litre of engine displacement is equal to 10 RAC horsepower)

Mechanical horsepower

See History of the term "horsepower"

The term "horsepower" was coined by the engineer James Watt (1736 to 1819) in 1782 while working in the performance of steam engines. The tax horsepower or taxable horsepower was an early system by which taxation rates for Automobiles were reckoned in some European countries like Britain, Belgium James Watt ( 19 January 1736 &ndash 25 August 1819 Boulton proved to be an excellent businessman and both men eventually made fortunes This occurred while using a mine pony to lift coal out of a coal mine. Pit POny Stablejpg|thumb|right|Stable inside a mine]]A pit pony was a type of Pony commonly used underground in Coal mines from the mid 18th up until the mid 20th He conceived the idea of defining the power exerted by these animals to accomplish this work. He found that, on the average, a mine pony could pull (lift by means of a pulley) 22,000 foot-pounds per minute. Rather than call this "pony" power, he increased these test results by 50 percent, and called it horsepower i. e. 33,000 foot-pounds of work per minute.

Assuming the third CGPM (1901, CR 70) definition of standard gravity, g, and the international avoirdupois pound (1958), one mechanical horsepower is:

1 hp	≡ 33,000 ft·lbf/min	by definition
	= 550 ft·lbf/s	since	1 min	= 60 s
	= 550 × 0. The General Conference on Weights and Measures is the English name of the Conférence générale des poids et mesures ( CGPM, never GCWM Standard gravity, usually denoted by g 0 or g n is the nominal acceleration due to gravity at the Earth's surface at sea level The pound or pound-mass (abbreviation lb, lbm, or sometimes in the United States #) is a unit of Mass 3048 × 0. 45359237 m·kgf/s	since	1 ft	= 0. The unit kilogram-force ( kgf, often incorrectly just kg) or kilopond ( kp) is defined as the Force exerted by Earth's gravity 3048 m and
	= 76. 0402249068 kgf·m/s		1 lb	= 0. 45359237 kg
	= 76. 0402249068 × 9. 80665 kg·m²/s³		g	= 9. 80665 m/s²
	= 745. 69987158227022 W	since	1 W	≡ 1 J/s = 1 N·m/s = 1 (kg·m/s²)·(m/s)

Or given that 1 hp = 550 ft·lbf/s, 1 ft = 0. The joule (written in lower case ˈdʒuːl or /ˈdʒaʊl/ (symbol J) is the SI unit of Energy measuring heat, Electricity The newton (symbol N) is the SI derived unit of Force, named after Isaac Newton in recognition of his work on Classical 3048 m, 1 lb = 4. 448 N, 1 J = 1 N-m, 1 W = 1 J/s: 1 hp = 746 W

cross multiply and cancel out:

550 ft-lb/s	0. 3048 m	4. 448 N	1 J	1 W
1 hp	1 ft	1 lb	1 N-m	1 J/s

= 745. 66272 W or 746 W

Metric horsepower

Metric horsepower began in Germany in the 19th century and became popular across Europe and Asia. Germany, officially the Federal Republic of Germany ( ˈbʊndəsʁepuˌbliːk ˈdɔʏtʃlant is a Country in Central Europe. The various units used to indicate this definition ("PS", "CV", "pk", and "ch") all translate to "horse power" in English, so it is common to see these values referred to as "horsepower" or "hp" in the press releases or media coverage of the German, French, Italian, and Japanese automobile companies. British manufacturers often intermix metric horsepower and mechanical horsepower depending on the origin of the engine in question.

Metric horsepower, as a rule, is defined as 0. 73549875 kW, or roughly 98. 6% of mechanical horsepower. This was a minor issue in the days when measurement systems varied widely and engines produced less power, but has become a major sticking point today. Exotic cars from Europe like the McLaren F1 and Bugatti Veyron are often quoted using the wrong definition, and their power output is sometimes even converted twice because of confusion over whether the original "horsepower" number was metric or mechanical. The McLaren F1 was formerly the fastest street legal production car in the world holding this record from 1994 to 2005 the longest period the record has been held The Bugatti Veyron 164 is a mid-engine Sports car produced by Volkswagen Group subsidiary Bugatti Automobiles SAS introduced in 2005

PS

This unit (German: Pferdestärke = horse strength) is no longer a statutory unit, but is still commonly used in Europe, South America and Japan, especially by the automotive and motorcycle industry. The German language (de ''Deutsch'') is a West Germanic language and one of the world's major languages. It was adopted throughout continental Europe with designations equivalent to the English "horsepower", but mathematically different from the British unit. It is defined by the Physikalisch-Technische Bundesanstalt (PTB)^[2] in Braunschweig as exactly:

1 PS = 75 kp·m/s = 0. Braunschweig, known as Brunswiek in Low German, is a city of 245810 people (as of 31 December 2007 located in Lower Saxony, Germany. The unit kilogram-force ( kgf, often incorrectly just kg) or kilopond ( kp) is defined as the Force exerted by Earth's gravity 73549875 kW = 0. 9863201652997627 hp (SAE)

The PS was adopted by the Deutsches Institut für Normung (DIN) and then by the automotive industry throughout most of Europe, under varying names. Deutsches Institut für Normung eV ( DIN; in English, the German Institute for Standardization) is the German national organization for In 1992, the PS was rendered obsolete by EEC directives, when it was replaced by the kilowatt as the official power measuring unit. It remained in use for commercial and advertising purposes, as customers were not familiar with the use of kilowatts for engines.

pk, hk and hv

The Dutch paardenkracht (pk), the Swedish hästkraft (hk), the Finnish hevosvoima (hv), the Norwegian and Danish hestekraft (hk) and the Hungarian lóerő (LE) all equal the German Pferdestärke (PS).

CV and cv

In Italian ("Cavalli"), Spanish ("Caballos"), and Portuguese ("Cavalos"), 'CV' is the equivalent to the German 'PS'. It is also used as the French term for the Pferdestärke, but in French, this should be written in lowercase letters as 'cv'.

In addition, the capital form 'CV' is a French unit for tax horsepower, short for chevaux vapeur ("steam horses") or cheval-vapeur. The tax horsepower or taxable horsepower was an early system by which taxation rates for Automobiles were reckoned in some European countries like Britain, Belgium CV is a non-linear rating of a motor vehicle for tax purposes. ^[3] The CV rating, or fiscal power, is , where P is the maximum power in kilowatts and U is the amount of CO₂ emitted in grams per kilometre. The fiscal power has found its way into naming of automobile models, such as the popular Citroën deux-chevaux. The Citroën 2CV ( French: deux chevaux vapeur, literally "two steam Horses quot from the Tax horsepower rating was an Economy car The cheval-vapeur (ch) unit should not be confused with the French cheval fiscal (CV).

In the 19th century the French had their own unit, which they used instead of the CV or horsepower. It was called the poncelet and was abbreviated 'p'. The poncelet (p is an obsolete unit of power once used in France and replaced by cheval vapeur (cv metric Horsepower)

ch

This is a French unit for automobile power. The symbol ch is short for chevaux ("horses"). Some sources give it as 0. 7355 kW, but it is generally used interchangeably with the German 'PS'.

Boiler horsepower

A boiler horsepower is used for boilers in power plants. A power station (also referred to as generating station, power plant or powerhouse) is an industrial facility for the generation of It is equal to 33,475 Btu/h (9. 8095 kW), which is the energy rate needed to evaporate 34. 5 lb (15. 65 kg) of water at 212 °F (100 °C) in one hour. Fahrenheit is a temperature scale named after Daniel Gabriel Fahrenheit (1686–1736 a German Physicist who proposed it in 1724 The Celsius Temperature scale was previously known as the centigrade scale.

Electrical horsepower

The electrical horsepower is used by the electrical industry for electrical machines and is defined to be exactly 746 W at 100% efficiency. Electric motors can never run at 100% efficiency. The nameplates on electrical motors show their motor power output, not their power input.

Relationship with torque

For a given torque, the equivalent power may be calculated. A torque (τ in Physics, also called a moment (of force is a pseudo- vector that measures the tendency of a force to rotate an object about The standard equation relating torque in foot-pounds, rotational speed in RPM and horsepower is:

Where P is power, τ is torque, and ω is rotations per minute. The foot-pound force, or simply foot-pound (symbol ft·lbf or ft·lb) is a unit of work or Energy (a scalar Outside the United States, most countries use the newton meter as the unit of torque. Newton metre is the unit of moment ( Torque) in the SI system Most automobile specifications worldwide have torque listed in newton meters. The standard equation relating torque in newton meters, rotational speed in RPM and power in kilowatts is:

These are based on Watt's definition of the mechanical horsepower. The constants 5252 and 9549 are rounded.

5252 comes from 33,000 (ft. lbf/min) / 2π (radians/revolution),

and 9549 comes from 60 (s/min) x 1000 (W/kW) / 2π (radians/revolution).

See torque. A torque (τ in Physics, also called a moment (of force is a pseudo- vector that measures the tendency of a force to rotate an object about

Drawbar horsepower

See Power at rail

Drawbar horsepower (dbhp) is the power a railway locomotive has available to haul a train or an agricultural tractor to pull an implement. The power at rail is the amount of power which a train applies to achieve the Tractive effort. "Railroad" and "Railway" both redirect here For other uses see Railroad (disambiguation. A locomotive is a railway Vehicle that provides the motive power for a Train. A train is a connected series of vehicles that move along a track ( Permanent way) to transport freight or passengers from one place to another This is a measured figure rather than a calculated one. A special railway car called a dynamometer car coupled behind the locomotive keeps a continuous record of the drawbar pull exerted, and the speed. A railroad car or railway carriage is a Vehicle on a rail transport system (railroad or railway that is used for the carrying of Cargo or A dynamometer car is a Railroad Maintenance of way car used for measuring various aspects of a Locomotive 's performance A drawbar is a solid Coupling between a hauling vehicle and its hauled load From these, the power generated can be calculated. To determine the maximum power available, a controllable load is required; is normally a second locomotive with its brakes applied, in addition to a static load.

If the drawbar force is measured in pounds-force (F / lbf) and speed is measured in miles per hour (v / mph), then the drawbar power in horsepower (P / hp) is:

Example: How much drawbar power is needed to pull a cultivator load of 2025 pounds-force through medium soil at 5 miles per hour?

The constant "375" is because 1 hp = 375 lbf·mph. This article deals with the unit of force For the unit of mass see Pound (mass. If other units are used, the constant is different. When using a coherent system of units, such as SI (watts, newtons, and metres per second), no constant is needed, and the formula becomes P = Fv.

RAC horsepower (taxable horsepower)

See also: Tax horsepower

This measure was instituted by the Royal Automobile Club in Britain and was used to denote the power of early 20th century British cars. The tax horsepower or taxable horsepower was an early system by which taxation rates for Automobiles were reckoned in some European countries like Britain, Belgium The Royal Automobile Club is a private Club and is not to be confused with RAC plc, a motorists' organization which it formerly owned The United Kingdom of Great Britain and Northern Ireland, commonly known as the United Kingdom, the UK or Britain,is a Sovereign state located Many cars took their names from this figure (hence the Austin Seven and Riley Nine), while others had names such as "40/50 hp", which indicated the RAC figure followed by the true measured power. The Austin Motor Company was a British manufacturer of automobiles that rose to be a major motorcar brand the dominant partner after merger with Morris in 1952 Riley was a British motorcar and Bicycle manufacturer from 1890

Taxable horsepower does not reflect developed horsepower; rather, it is a calculated figure based on the engine's bore size, number of cylinders, and a (now archaic) presumption of engine efficiency. As new engines were designed with ever-increasing efficiency, it was no longer a useful measure, but was kept in use by UK regulations which used the rating for tax purposes. The tax horsepower or taxable horsepower was an early system by which taxation rates for Automobiles were reckoned in some European countries like Britain, Belgium

where

D is the diameter (or bore) of the cylinder in inches

n is the number of cylinders

This is equal to the displacement in cubic inches divided by 10π then divided again by the stroke in inches. ^[4]

Since taxable horsepower was computed based on bore and number of cylinders, not based on actual displacement, it gave rise to engines with 'undersquare' dimensions, i. e. relatively narrow bore, but long stroke; this tended to impose an artificially low limit on rotational speed (rpm), hampering the potential power output and efficiency of the engine.

The situation persisted for several generations of four- and six-cylinder British engines: for example, Jaguar's 3. Jaguar Cars Limited is a luxury car manufacturer based in Coventry, England, now operated as part of the Jaguar Land Rover business 8-litre XK engine had six cylinders with a bore of 87 mm (3. 43 inches) and a stroke of 106 mm (4. 17 inches), where most American automakers had long since moved to oversquare (wide bore, short stroke) V-8s]

Measurement

The power of an engine may be measured or estimated at several points in the transmission of the power from its generation to its application. A V8 engine is a V engine with eight cylinders mounted on the Crankcase in two banks of four cylinders in most cases set at a right angle to each other A number of names are used for the power developed at various stages in this process, but none is a clear indicator of either the measurement system or definition used.

In general:

Nominal is derived from the size of the engine and the piston speed and is only accurate at a pressure of 7 lbf/in². ^[5]

Indicated or gross horsepower (theoretical capability of the engine)

minus frictional losses within the engine (bearing drag, rod and crankshaft windage losses, oil film drag, etc. ), equals

Brake / net / crankshaft horsepower (power delivered directly to and measured at the engine's crankshaft)

minus frictional losses in the transmission (bearings, gears, oil drag, windage, etc. ), equals

Shaft horsepower (power delivered to and measured at the output shaft of the transmission, when present in the system)

minus frictional losses in the universal joint/s, differential, wheel bearings, tire and chain, (if present), equals

Effective, True (thp) or commonly referred to as wheel horsepower (whp)

All the above assumes that no power inflation factors have been applied to any of the readings.

Nominal horsepower

Nominal horsepower (nhp) is an early Nineteenth Century rule of thumb used to estimate the power of steam engines. A rule of thumb is a principle with broad application that is not intended to be strictly accurate or reliable for every situation

nhp = 7 x area of piston x equivalent piston speed/33,000

For paddle ships the piston speed was estimated as 129. 7 x (stroke)^{1/3. 35}

For the nominal horsepower to equal the actual power it would be necessary for the mean steam pressure in the cylinder during the stroke to be 7 psi and for the piston speed to be of the order of 180-248 ft/s. ^[5]

Indicated horsepower

Indicated horsepower (ihp) is the theoretical power of a reciprocating engine if it is completely efficient in converting the energy contained in the expanding gases in the cylinders. It is calculated from the pressures developed in the cylinders, measured by a device called an engine indicator - hence indicated horsepower. It was the figure normally used for steam engines in the 19th century but is misleading because the mechanical efficiency of an engine means that the actual power output may only be 70% to 90% of the indicated horsepower. A steam engine is a Heat engine that performs Mechanical work using Steam as its Working fluid.

SAE gross horsepower

Prior to the 1972 model year American automakers rated their engines in terms of SAE gross horsepower (defined under SAE standards J245 and J1995). SAE International (SAE is a professional organization for mobility engineering professionals in the Aerospace, Automotive, and commercial Vehicle industries Gross hp was measured using a blueprinted test engine running on a stand without accessories, air cleaner, mufflers, or emissions control devices and sometimes fitted with long tube "test headers" in lieu of the OEM exhaust manifolds. The atmospheric correction standard (e. g. barometric pressure, humidity and temperature) that was utilized in obtaining the Gross ratings was more idealistic than that which is used under the SAE net rating system. The resulting Gross power (and torque) figures therefore reflected a maximum, theoretical value and not the power of an installed engine in a street car. Gross horsepower figures were also subject to considerable adjustment by the manufacturer's advertising and marketing staff under the direction of product managers. The power ratings of mass-market engines were often exaggerated beyond their actual Gross output, while those of the highest-performance muscle car engines often tended to be closer in actual output to their advertised, Gross ratings. It should be noted that no pre-1972 "muscle car" engine in its unaltered, production line stock form and in its as "as installed" (SAE net) condition has ever yielded documented, qualified third party validated power figures that equal or exceed its original Gross rating. Claims that such engines were "under-rated" are therefore highly dubious. It is therefore more accurate to say that the ratings of the highest performance engines from that period tended to be less exaggerated than those of more typical passenger cars, but still exaggerated relative to what could be obtained in the SAE net configuration. For example, the ultra-rare and exotic 1969 427 ZL1 Chevy (rated @ 430 Gross HP) is frequently cited as one of the most "under-rated" high performance engines from that period, yet it could only produce 376 SAE NET HP. ^[6] It should be noted that today's various "Stock" drag racing events (e. g. "Pure Stock Drags" and the "Certified Stock" sub-grouping) allow the engines to be fully blueprinted per NHRA technical bulletins, which yields ideal tolerances and can increase actual compression ratio by more than 2 full points. These series also permit various other performance-enhancing alterations (e. g. over-bores, wide-flank cams, forged internals, stiffer valve springs, adjustable push-rods and poly-locks for optimal valve train geometry, modern exhaust systems with mandrel bent, 2. 5 inches (64 mm) pipes and low restriction mufflers, fully locked differentials, etc. ). Therefore, the results achieved in those events often don't reflect the performance potential (or engine output) of the car in its original, unaltered and production-line stock form.

Brake horsepower

Brake horsepower (bhp) is the measure of an engine's horsepower without the loss in power caused by the gearbox, generator, differential, water pump, and other auxiliary components such as alternator, power steering, and AC compressor. Thus the prefix "brake" refers to where the power is measured: at the engine's output shaft, as on an engine dynamometer. For the dynamometer used in railroading see Dynamometer car. A dynamometer or "dyno" for short is a machine used to measure The actual horsepower delivered to the driving wheels is less. An engine would have to be retested to obtain a rating in another system. The term "brake" refers to the original use of a band brake to measure torque during the test (which is multiplied by the engine RPM and a scaling constant to give horsepower). A band brake is a Measuring device for loading a rotating shaft and measuring the Torque applied to it and is mainly used to determine Brake horsepower. A torque (τ in Physics, also called a moment (of force is a pseudo- vector that measures the tendency of a force to rotate an object about

hp (SAE)

In the United States the term "bhp" fell into disuse after the American Society of Automotive Engineers (SAE) recommended manufacturers use hp (SAE) to indicate the net power of the engine, given that particular car's complete engine installation. SAE International (SAE is a professional organization for mobility engineering professionals in the Aerospace, Automotive, and commercial Vehicle industries It measures engine power at the flywheel, not counting transmission losses (or anything after the flywheel). A flywheel is a mechanical device with significant Moment of inertia used as a storage device for Rotational energy.

Starting in 1971 automakers began to quote power in terms of SAE net horsepower (as defined by standard J1349). This reflected the rated power of the engine in as-installed trim, with all accessories and standard intake and exhaust systems. By 1972, US carmakers quoted power exclusively in SAE net hp. The change was meant to 'deflate' power ratings to assuage the auto insurance industry and environmental and safety lobbies, as well as to obfuscate the power losses caused by emissions-control equipment. Vehicle insurance (also known as auto insurance, car insurance, or motor insurance) is Insurance purchased for cars, Trucks Smog is a kind of Air pollution; the word "smog" is a Portmanteau of Smoke and Fog.

SAE net ratings, while more accurate than gross ratings, still represent the engine's power at the flywheel. Contrary to some reports, it does not measure power at the drive wheels.

Because SAE gross ratings were applied liberally, at best, there is no precise conversion from gross to net. Comparison of gross and net ratings for unchanged engines shows a variance of anywhere from 40 to 150 horsepower. The Chrysler 426 Hemi, for example, in 1971 carried a 425 hp gross rating and a net rating of 350 hp. Chrysler LLC is an American Automobile manufacturer that has been producing Automobiles since 1925 A Chrysler Hemi engine, known by the trademark Hemi, is an Internal combustion engine built by Chrysler that utilizes a hemispherical ^[7]

SAE-certified horsepower

In 2005, the Society of Automotive Engineers introduced a new test procedure for engine horsepower and torque. SAE International (SAE is a professional organization for mobility engineering professionals in the Aerospace, Automotive, and commercial Vehicle industries A torque (τ in Physics, also called a moment (of force is a pseudo- vector that measures the tendency of a force to rotate an object about ^[8] The procedure eliminates some of the areas of flexibility in power measurement, and requires an independent observer present when engines are measured. The test is voluntary, but engines completing it can be advertised as "SAE-certified".

Many manufacturers began switching to the new rating immediately, often with surprising results. The rated output of Cadillac's supercharged Northstar V8 jumped from 440 hp (328 kW) to 469 hp (350 kW) under the new tests, while the rating for Toyota's Camry 3. Cadillac is a Brand of Luxury vehicles owned by General Motors. A supercharger is an air compressor used for Forced induction of an Internal combustion engine. The Premium V family of Automobile engines is General Motors ' modern 90° V engine architecture (pronounced) is a Multinational corporation headquartered in Japan, and is currently the world's largest Automaker. The Toyota Camry is a Mid-size car, formerly a Compact car manufactured by Toyota since 1980 0 L 1MZ-FE V6 fell from 210 hp (157 kW) to 190 hp (142 kW). The Toyota MZ engine family is a V6 Piston engine series The MZ series has an aluminium engine block and aluminium alloy DOHC Cylinder The first engine certified under the new program was the 7. 0 L LS7 used in the 2006 Chevrolet Corvette Z06. The LS series is a new design intended as the only V-8 engine utilized in General Motors ' line of RWD cars and trucks The Chevrolet Corvette is a Sports car that has been manufactured by General Motors since 1953 Certified power rose slightly from 500 hp (373 kW) to 505 hp (377 kW).

hp (DIN)

DIN horsepower is the power measured according to the German standard DIN 70020 and like the SAE net figure is measured at the flywheel. Germany, officially the Federal Republic of Germany ( ˈbʊndəsʁepuˌbliːk ˈdɔʏtʃlant is a Country in Central Europe. Deutsches Institut für Normung eV ( DIN; in English, the German Institute for Standardization) is the German national organization for It is sometimes abbreviated as "PS", which stands for Pferdestärke, German for horsepower. The German language (de ''Deutsch'') is a West Germanic language and one of the world's major languages. However, DIN "horsepower" is often expressed in metric (Pferdestärke) rather than mechanical horsepower.

hp (ECE)

ECE R24 is another standard for measuring net horsepower. It is quite similar to the DIN 70020 standard, but the requirement for connecting an engine's fan during testing varies. ECE is seen as slightly more liberal than DIN, and ECE figures tend to be slightly higher than DIN. John Deere is one strong adherent to ECE testing. John Deere ( February 7, 1804 &ndash May 17, 1886) was an American blacksmith and manufacturer who founded Deere & Company &mdash

9768-EC

9768-EC is a European Union Standard. The European Union ( EU) is a political and economic union of twenty-seven member states, located primarily in Generally very similar to ISO-14396.

ISO 14396

ISO 14396 is a new standard from the ISO for all engines not intended for on-road use. Generally, ISO-14396 and 9768-EC metrics are very similar.

Note: Brake Horse Power, or indeed any other absolute measurement of power output, is measured where convenient. Whether ancillary equipment such as fan, alternator water pump etc are connected or not is immaterial to the expression of power measurement.

Obviously, if ancillary equipment is connected this will consume power and net output will be lower. However, the expression "Brake Horsepower" will still pertain, since it is an expression and not the measurement, per se.

In the case of an engine dynamometer being used to measure, power is measured at the flywheel. With a chassis dynamometer (or Rolling Road), power output is measured at the driving wheels, thus taking into account power loss through the drive train, which can be significant, particularly with front wheel drive vehicles. As an example, a standard earlier BMC/BLMC/BL Mini 850 c. c produced circa 34 bhp at the flywheel, yet only circa 18. 20 bhp at the front - driving wheels!

Manufacturers traditionally quoted net power output in BHP measured at the flywheel. Ancillary equipment (water pump, cooling fan, alternator, power steering pump, air-conditioning compressor) were removed, thus the power outputs quoted were highly misleading and optimistic.

It matters not which mathematical expression is used to denote power output, since all different expressions can be cross converted, as with any other measurements of power, such as kilowatt and British thermal units. Engine designers use other expressions to denote objective targets or performance such as BMEP (Brake Mean Effective pressure). This is a coefficient of theoretical brake horsepower and cylinder pressures during combustion.

The term Brake Horsepower comes from the earliest methodology used to measure engine power output, simply a band brake of friction materials set around a steel drum connected to the engine flywheel by (e. g. ) a Cardon Shaft, with resistance being applied by a spring balance and as the resistance to rotation was increased by the brake, the spring balance would read higher. The maximum Brake Horsepower is calculated by using the diameter of the brake drum and the weight exerted by the spring balance at the point where the load is greatest (in pounds, kilograms etc) and the engine is at the point just before stall with this load.

Later and traditional dynamometers (always affectionately referred to as a "Brake" or an "Engine Brake"), used a water gate resistance. The leading British manufacturer was Heenan and Froude, who provided most engine and chassis brakes from the 1930s onwards to both manufacturers and engine designers and race engine developers/tuners.

Shaft horsepower

Shaft horsepower (shp) is the power delivered to the propeller shaft of a ship or an airplane powered by a piston engine or a turbine engine (the combination of turbine engine and propeller commonly called a turboprop). A propeller is essentially a type of fan which transmits power by converting Rotational motion into Thrust for propulsion of a vehicle such as an A ship /ʃɪp/ is a large vessel that floats on water Ships are generally distinguished from Boats based on size A turboprop engine is a type of aircraft powerplant that uses a Gas turbine engine to drive a Propeller. This may be measured, or estimated from the indicated horsepower given a standard figure for the losses in the transmission (typical figures are around 10%). This metric is uncommon in the automobile industry, though drivetrain losses can be significant.

Effective horsepower / true horsepower / wheel horsepower

Effective horsepower (ehp), True horsepower (thp) or wheel horsepower (whp) is the power converted to useful work. In the case of a road vehicle this is the power actually turned into forward motion as measured on a chassis dynamometer. For the dynamometer used in railroading see Dynamometer car. A dynamometer or "dyno" for short is a machine used to measure

"True hp" is generally 10% to 20% less than the engine's "bhp" ratings due to drivetrain losses.

Wheel horsepower (whp) is the more widely used term for effective horsepower.

History of the term "horsepower"

The development of the steam engine provided a reason to equate the output of horses with the engines that could replace them. In 1702, Thomas Savery wrote in The Miner's Friend: "So that an engine which will raise as much water as two horses, working together at one time in such a work, can do, and for which there must be constantly kept ten or twelve horses for doing the same. Then I say, such an engine may be made large enough to do the work required in employing eight, ten, fifteen, or twenty horses to be constantly maintained and kept for doing such a work. . . " The term "horsepower" was coined later by James Watt to help market his improved steam engine. James Watt ( 19 January 1736 &ndash 25 August 1819 Boulton proved to be an excellent businessman and both men eventually made fortunes A steam engine is a Heat engine that performs Mechanical work using Steam as its Working fluid. He had previously agreed to take royalties of one third of the savings in coal from the older Newcomen steam engines. The atmospheric engine invented by Thomas Newcomen in 1712 today referred to as a Newcomen steam engine (or simply Newcomen engine was the first practical ^[9] This royalty scheme did not work with customers who did not have existing steam engines but used horses instead. Watt determined that a horse could turn a mill wheel 144 times in an hour (or 2. 4 times a minute). The wheel was 12 feet in radius, therefore the horse travelled 2. 4 × 2π × 12 feet in one minute. Watt judged that the horse could pull with a force of 180 pounds (assuming that the measurements of mass were equivalent to measurements of force in pounds-force, which were not well-defined units at the time). In Physics, a force is whatever can cause an object with Mass to Accelerate. So:

This was rounded to an even 33,000 ft·lbf/min. ^[10]

Others recount that Watt determined that a pony could lift an average 220 pounds 100 feet (30 m) per minute over a four-hour working shift. Watt then judged a horse was 50% more powerful than a pony and thus arrived at the 33,000 ft·lbf/min figure.

Engineering in History recounts that John Smeaton initially estimated that a horse could produce 22,916-foot-pounds per minute. John Desaguliers increased that to 27,500-foot-pounds per minute. "Watt found by experiment in 1782 that a 'brewery horse' was able to produce 32,400-foot-pounds per minute". James Watt and Matthew Boulton standardized that figure at 33,000 the next year. ^[11]

Put into perspective, a healthy human can produce about 1. 2 hp briefly (see Orders of magnitude (power)) and sustain about 0. This page lists examples of the power in Watts produced by various different sources of energy 1 hp indefinitely, and trained athletes can manage up to about 0. 3 horsepower for a period of several hours.

Most observers familiar with horses and their capabilities estimate that Watt was either a bit optimistic or intended to under promise and over deliver; few horses can maintain that effort for long. Regardless, comparison to a horse proved to be an enduring marketing tool.

Horsepower from a horse

R. D. Stevenson and R. J. Wasserzug published an article in Nature 364, 195-195 (15 July 1993) calculating the upper limit to an animal's power output. Events 1099 - First Crusade: Christian soldiers take the Church of the Holy Sepulchre in Jerusalem after the final Year 1993 ( MCMXCIII) was a Common year starting on Friday (link will display full 1993 Gregorian calendar) The peak power over a few seconds has been measured to be as high as 14. 9 hp. However, for longer periods an average horse produces less than one horsepower.

References

External links

• Power and Torque Explained A clear explanation of the relationship between Power and Torque, and how they relate to engine performance.
• How Stuff Works - Horsepower
• "Horsepower and Torque" An article showing how power, torque, and gearing affect a vehicle's performance.
• Online Horsepower Converter
• "Horsepower and power losses" Explains Horsepower and the power losses in the engine and powertrain.
• "What is Horsepower?" (picture)
• "What's the difference between horsepower and torque?" at the Straight Dope
• "True hp figures as compared to inflated."
• Horsepower vs. Torque article
• "chassis dyno hp numbers, origin of inflated "
• Bristol Dyno - What is a dynamometer?
• Horsepower listings of all current cars.
• DYNO-mite Dynamometer "How Dynos Work" article on DYNO-mite Dynamometer site. The Straight Dope is a popular question-and-answer Newspaper column published in the Chicago Reader, syndicated in thirty Newspapers
• [1] Dyno Test result of production line stock 1969 427 ZL1 Chevrolet V8

© 2009 citizendia.org; parts available under the terms of GNU Free Documentation License, from http://en.wikipedia.org
Dapyx Software network: MP3 Explorer | Ebook Manager | Zenithic