A flue pipe (also referred to as a labial pipe) is an organ pipe that produces sound through the vibration of air molecules, in the same manner as a recorder or a whistle. An organ pipe is a sound-producing element of the Pipe organ that resonates at a specific pitch when pressurized air (commonly referred to as wind The recorder is a woodwind Musical instrument of the family known as Fipple Flutes ' or internal duct flutes &mdash whistle-like A simple whistle is a Woodwind instrument which produces Sound from a stream of forced air Air under pressure (referred to as wind) is driven down a Flue and against a sharp lip called a Labium, which causes the column of air in the pipe to resonate at a frequency determined by the pipe length. See Von Karman vortex street . A Kármán vortex street is a repeating pattern of swirling vortices caused by the unsteady separation of flow over bluff bodies Thus, there are no moving parts in a flue pipe. This is in contrast to reed pipes, which are driven by a beating reed, similar to the clarinet. A reed pipe (also referred to as a lingual pipe is an Organ pipe that is sounded by a vibrating Brass strip known as a reed. A reed is a thin strip of material which vibrates to produce a sound on a Musical instrument. The clarinet is a Musical instrument in the Woodwind family The name derives from adding the suffix -et meaning little to the Italian word Flue pipes are common components of pipe organs. The pipe organ is a Musical instrument that produces sound when pressurized air (wind is driven through a series of pipes, controlled by a keyboard
Contents |
Stop
Flue pipes include all stops of the "Principal", "Flute", and "String" classes, and some stops from the "Hybrid" class.
Construction
1. Pipe body or resonator
2. Upper labial lip
3. Languid
4. Lower lip
5. Foot
6. Toe hole
Flue pipes may be made of either metal or wood. The M acro E xpansion T emplate A ttribute L anguage complements TAL, providing macros which allow the reuse of code across Wood is hard fibrous lignified structural tissue produced as secondary Xylem in the stems of Woody plants notably trees but also shrubs Metal pipes are normally circular in cross section, while wooden pipes are most often rectangular or square, though triangular and cylindrical wooden pipes have been made. Circles are simple Shapes of Euclidean geometry consisting of those points in a plane which are at a constant Distance, called the In Geometry, a rectangle is defined as a Quadrilateral where all four of its angles are Right angles A rectangle with vertices ABCD would be denoted as Classification A square (regular Quadrilateral) is a special case of a Rectangle as it has four right angles and equal parallel sides A triangle is one of the basic Shapes of Geometry: a Polygon with three corners or vertices and three sides or edges which are Line A cylinder is one of the most basic curvilinear geometric shapes the Surface formed by the points at a fixed distance from a given Straight line, the axis
A flue pipe comprises two main portions: the foot and the resonator. The foot is the bottom portion of the pipe. At its base is the toe hole, through which wind enters the pipe. The length of the pipe foot does not affect the pipe's pitch. Thus, organ builders vary the foot lengths of their flue pipes depending on several factors, including the desired shape of the pipes in the façade, the height of the rackboard in which the pipes are seated, and the weight of the completed pipe.
The resonator supports the vibration of air generated by the mouth of the pipe, which is a horizontal opening cut at the joint between the resonator and the foot. The voicing, the length of the resonator, and the resonator's cubic volume all determine the fundamental pitch of the flue pipe. The volume of any solid plasma vacuum or theoretical object is how much three- Dimensional space it occupies often quantified numerically The conical taper of the pipe will determine the overblown pitch. If the pipe is metal, a tuning sleeve or tuning collar may be attached to the top of the resonator, which can be raised or lowered to change its length, thereby changing the pitch produced.
At the joint between the foot and the resonator, the side of the pipe containing the mouth is flat. A plate of metal or wood called a languid is affixed horizontally inside the pipe at this location, completely dividing the resonator and the foot, except for a small slot (called the windway) parallel to the mouth. This creates a chamber inside the pipe foot, allowing air to escape only as a sheet of wind directed towards the pipe's mouth. Flat pieces of metal or wood (called ears) may be attached to the sides of the mouth for tuning purposes, and a horizontal dowel (called a roller or a beard) may be affixed at the pipe mouth to aid in prompt pipe speech.
Actuation
When wind is driven into the foot of the pipe, a sheet of wind is focused by the windway across the mouth to strike just above the edge of the upper lip. This creates a Bernoulli effect, or "siphon effect," causing a low pressure area to be created just below the mouth. In Fluid dynamics, Bernoulli's principle states that for an Inviscid flow, an increase in the speed of the fluid occurs simultaneously with a decrease in Pressure (symbol 'p' is the force per unit Area applied to an object in a direction perpendicular to the surface When this low pressure area reaches a critical stage, it pulls the air stream past the edge of the mouth, filling the vacuum. This pressurizes the opposite of the previous state, an alternating pressurization and rarefaction of the air column contained within the pipe's resonator. This is described by the Von Kármán vortex street phenomenon. A Kármán vortex street is a repeating pattern of swirling vortices caused by the unsteady separation of flow over bluff bodies The column of air in the resonator thus vibrates at the tuned frequency determined by the pipe's dimensions. [1][2]
Tonal groups
Flue pipes generally belong to one of three tonal families: flutes, diapasons (or principals), and strings. The basic "foundation" (from the French term fonds) sound of an organ is composed of varying combinations of these three tonal groups, depending upon the particular organ and the literature being played. French ( français,) is a Romance language spoken around the world by 118 million people as a native language and by about 180 to 260 million people The organ repertoire consists of Music written for the organ.
The end of the pipe opposite the mouth may be either open or closed (also known as "Gedecked" or stopped). An open pipe produces a tone in which both the even-numbered and the odd-numbered partials are present, while a stopped pipe, produces a tone with only the odd-numbered partials. See Harmonic series (mathematics for the (related mathematical concept In stopped pipes, the wind travels both up and down the body of the pipe, doubling the length of the column of sound; thus, a Closed tube sounds an octave lower than an open pipe of the same length. In the field of Acoustics, a tone is created by the periodic vibrations of air applied to a resonator The tone of a stopped pipe tends to be gentler and sweeter than that of an open pipe, though this is largely at the discretion of the voicer.
Flutes
Flutes are generally the widest-scaled flue pipes and produce the tone with the most fundamental among flue pipes. The subject of this article is technical in nature and requires an understanding of organ terminology They are so named because they sound like the flute; though most flute stops are not intended to imitate the orchestral instrument, they produce a similar sound. The flute is a Musical instrument of the Woodwind family Unlike other woodwind instruments a flute is a Reedless wind instrument that produces its A stopped flute, such as the Gedackt (German for covered), produces a more muffled sound, while an open flute, such as the Waldflöte (German for forest flute), produces a rounder, open sound. Gedackt (also spelled gedeckt) is the name of a family of stops in Pipe organ building The German language (de ''Deutsch'') is a West Germanic language and one of the world's major languages. The Flûte harmonique (French for harmonic flute), whose use the great nineteenth-century French organ builder Aristide Cavaillé-Coll advocated, is a metal flute pipe of double length with a hole punched in the center, which causes the pipe to speak at its first partial with a very round, intense sound. French ( français,) is a Romance language spoken around the world by 118 million people as a native language and by about 180 to 260 million people The 19th century of the Common Era began on January 1, 1801 and ended on December 31, 1900, according to the Gregorian calendar Aristide Cavaillé-Coll ( 4 February 1811 &ndash 13 October 1899) was a French Organ builder. The Rohrflöte (German for pipe flute; often called Chimney flute in English) is a stopped flute rank with a small pipe or chimney built into the cap.
Diapasons
Diapasons or principals represent the characteristic sound of the pipe organ. They are not intended to imitate any other instrument or sound. They are medium-scaled and are often prominently featured in the façades of pipe organs. Diapasons appear throughout the entire range of the instrument, from 32′ pitch to 1′ pitch (not including mixtures), a range of nine octaves. A mixture is an Organ stop of principal tone quality that contains multiple ranks of pipes.
A stop of diapason tone quality may or may not actually be labelled "Diapason. " The "Diapason" label is most commonly used in English-style organs, whereas the same type of stop is known as a "Prinzipal" or "Principal" on German-style organs and a "Montre" or "Prestant" on French-style organs. Furthermore, diapasons at pitches higher than 8′ pitch are often labelled with other names. For example, on English-style organs, the stops called Principal and Fifteenth sound one octave and two octaves respectively above the 8′ Diapason; on German-style organs, the name Octav is used to indicate the stop an octave above the 8′ Prinzipal.
Strings
String pipes are the smallest-scaled flue pipes. This produces a bright sound that is rich in upper partials. String stops are generally named after bowed string instruments such as the Violoncelle, the Gamba, the Geigen (from the German geige, for violin), and the Viol. In Music, a bow is moved across some part of a Musical instrument, causing Vibration which the instrument emits as Sound. A string instrument (or stringed instrument) is a Musical instrument that produces Sound by means of Vibrating strings In the Hornbostel-Sachs The violoncello (abbreviated to cello, or 'cello, plural cellos or celli —the c is tʃ The violin is a bowed String instrument with four strings usually tuned in Perfect fifths It is the smallest and highest-pitched member The viol (also called viola da gamba) is any one of a family of bowed, Fretted stringed Musical instruments developed in the 1400s
Undulating stops
Often, an organ will feature two similarly-voiced stops, one tuned slightly sharp or flat of the other. When these stops are played together, a unique undulating effect results. Examples include the Voix céleste (French for celestial voice), typically tuned slightly sharp, and the Unda maris (Latin for sea waves), typically tuned slightly flat. Latin ( lingua Latīna, laˈtiːna is an Italic language, historically spoken in Latium and Ancient Rome. String stops are most commonly used as undulating stops, though some builders have made undulating flute stops (notably Ernest M. Skinner's Flute celeste), and rarely an organ may feature an undulating diapason. Ernest M Skinner (1866 in Clarion Pennsylvania &ndash November 26/27 1960 was one of the most successful American organ builders of the early 20th century
Labial reeds
Some flue pipes are designed to produce the sounds of reed pipes or to imitate the sounds of orchestral instruments which are approximated by reed pipes. The sound is generally more mellow and sweet than that of a true reed pipe. Examples include the Saxophone, the Muted horn, the Clarinet flute, and the Echo oboe.
Tonal characteristics
The diameter of a flue pipe directly affects its tone. When comparing pipes of otherwise identical shape and size, a wide pipe will tend to produce a flute tone, a medium pipe a diapason tone, and a narrow pipe a string tone. These relationships are referred to as the scale of the pipe: i. The subject of this article is technical in nature and requires an understanding of organ terminology e. , wide-scaled, normal-scaled, or narrow-scaled. As a pipe's scale increases, more fundamental will be present, and fewer partials will be present in the tone. Thus, the tone becomes richer and fuller as the pipe's diameter widens from string scale to principal scale to flute scale.
The material out of which the pipe is constructed also has much to do with the pipe's final sound. While recent scientific studies have shown that the nature of the metal used in making the pipe has little or no effect on the final sound, organ builders agree that a tin/lead alloy, for example, creates a very different tone than does zinc or copper metals or spotted or frosted alloys.
References
- ^ Arther H. Benade, Fundamentals of Musical Acoustics.
- ^ Mainstone, John (1999), "The physics of the organ," in Thistlethwaite, Nicholas and Webber, Geoffrey (eds. ), The Cambridge Companion to the Organ (Cambridge: Cambridge University Press), p. 31–41. ISBN 0-521-57584-2
External links
Dapyx Software network: MP3 Explorer | Ebook Manager | Zenithic