Common display resolutions

The display resolution of a digital television or computer display typically refers to the number of distinct pixels in each dimension that can be displayed. See also Display resolution This is a list of image resolutions sorted by the horizontal Pixel dimension in ascending numerical order Digital television (DTV is the sending and receiving of moving images and sound by discrete ( digital) signals in contrast to the analog signals used by A visual display unit, often called simply a monitor or display, is a piece of Electrical equipment which displays images generated from the Video It can be an ambiguous term especially as the displayed resolution is controlled by all different factors in cathode ray tube (CRT) and flat panel or projection displays using fixed picture-element (pixel) arrays. The cathode ray tube (CRT is a Vacuum tube containing an Electron gun (a source of electrons and a Fluorescent screen with internal or In Digital imaging, a pixel ( pict ure el ement is the smallest piece of information in an image

One use of the term "display resolution" applies to fixed-pixel-array displays such as plasma display panels (PDPs), liquid crystal displays (LCDs), digital light processing (DLP) projectors, or similar technologies, and is simply the physical number of columns and rows of pixels creating the display (e. A plasma display panel (PDP is a type of Flat panel display now commonly used for large TV displays (typically above 37-inch or 940 mm Digital Light Processing (DLP is a Trademark owned by Texas Instruments, representing a technology used in projectors and Video projectors It was g. , 1280×1024). A consequence of having a fixed grid display is that for multiformat video inputs all displays need a "scaling-engine" (a digital video processor that includes a memory array) to match the incoming picture format to the display.

Note that the use of the word resolution here is misleading. The term "display resolution" is usually used to mean pixel dimensions (e. g. , 1280×1024), which does not tell you anything about the resolution of the display on which the image is actually formed (which would typically be given in pixels per inch (digital) or number of lines measured horizontally, per picture height (analog)).

Considerations

Some commentators also use this term to indicate a range of input formats that the display's input electronics will accept and often include formats greater than the screen's native grid size even though they have to be down-scaled to match the screen's parameters (e. g. , accepting a 1920×1080 input on a display with a native 1366×768 pixel array). In the case of television inputs, many manufacturers will take the input and zoom it out to "overscan" the display by as much as 5% so input resolution is not necessarily display resolution.

The eye's perception of "display resolution" can be affected by a number of factors—see Image resolution and Optical resolution. Image resolution describes the detail an Image holds The term applies equally to Digital images film images and other types of images Optical resolution describes the ability of an imaging system to resolve detail in the object that is being imaged One factor is the display screen's rectangular shape, which is expressed as the ratio of the physical picture width to the picture height. This is known as the aspect ratio. The aspect ratio of an Image is its width divided by its height A screen's physical aspect ratio and the individual pixels' aspect ratio may not necessarily be the same. An array of 1280×720 on a 16:9 display has square pixels. An array of 1024×768 on a 16:9 display has rectangular pixels.

An example of pixel shape affecting "resolution" or perceived sharpness: displaying more information in a smaller area using a higher resolution makes the image much clearer. However, newer LCD displays and such are fixed at a certain resolution; making the resolution lower on these kinds of screens will greatly decrease sharpness, as an interpolation process is used to "fix" the non-native resolution input into the displays native resolution output. The native resolution of a LCD, LCoS or other flat panel display refers to its single fixed resolution.

While some CRT-based displays may use digital video processing that involves image scaling using memory arrays, ultimately "display resolution" in CRT-type displays is affected by different parameters such as spot size and focus, astigmatic effects in the display corners, the color phosphor pitch shadow mask (such as Trinitron) in color displays, and the video bandwidth. Video processing techniques are used in Video codecs, Video players and other devices See also Aberration in optical systems, Astigmatism (eye An Optical system with astigmatism is one where rays that propagate The shadow mask is one of two major technologies used to manufacture Cathode ray tube (CRT Televisions and Computer displays that produce Color Trinitron is Sony 's Brand name for its line of Aperture grille Cathode ray tube Televisions and

Overview

Analog television systems use interlace scanning with two sequential scans (50 or 60 fields per second), one with the odd numbered lines, the other with the even numbered lines to give a complete picture (25 or 30 frames per second). Analog (or analogue) television encodes Television picture and sound information and transmits it as an Analog signal: one in which the This is done to save transmission bandwidth but a consequence is that in picture tube (CRT) displays, the full vertical resolution cannot be realized. For example, the maximum detail in the vertical direction would be for adjacent lines to be alternately black then white. This is not a problem in a progressive display but an interlace display will have an unacceptable flicker or twitter at the slower frame rate. This is why interlace is unacceptable for fine detail such as computer word processing or spreadsheets. For television it means that if the picture is intended for interlace displays the picture must be vertically filtered to remove this objectionable flicker with a reduction of vertical resolution. According to the Kell factor the reduction is to about 85%, so a 576 line PAL interlace display only has about 480 lines vertical resolution, and a 486 line NTSC interlace display has a resolution of approximately 410 lines vertical. There are some conflicting and confusing points in the following article Similarly, 1080i digital interlaced video would need to be filtered to about 910 lines for an interlaced display, although a fixed pixel display (such as LCD) eliminates the inaccuracies of scanning, and thus can achieve Kell factors as high as 95% or 1020 lines.

Fixed pixel array displays such as LCDs, plasmas, DLPs, LCoS, etc. need a "scaling" processor with frame memory, which, depending on the processing system, effectively converts an incoming interlaced picture into progressive. A similar process occurs in a PC and its display with interlaced video (e. g. , from a TV tuner card). The downside is that interlace motion artifacts are almost impossible to remove resulting in horizontal "toothed" edges on moving objects.

Also in analog connected picture displays such as CRT TV sets, the horizontal scanlines are not divided into pixels, and therefore the horizontal resolution is related to the bandwidth of the luminance and chroma signals. As applied to video signals luma represents the brightness in an image (the "black and white" or achromatic portion of the image For television, the analog bandwidth for luminance in standard definition can vary from 3 MHz (approximately 330 lines edge-to-edge; VHS) to 4. 2 MHz (440 lines; live analog tv) up to 7 MHz (660 lines; DVD). In high definition the bandwidth is 37 MHz (720p/1080i) or 74 MHz (1080p/60).

Current standards

Image:Aspect Ratios and Resolutions

Televisions are of the following resolutions:

SDTV: 480i (720×480 split into two 240-line fields)
EDTV: 480p (720×480)
HDTV: 720p (1280×720)
HDTV: 1080i (1280×1080, 1440×1080, or 1920×1080 split into two 540-line fields)
HDTV: 1080p (1920*1080 progressive scan)

Computers have higher resolutions:

Currently, 1024×768 Extended Graphics Array is the most common display resolution. XGA, the Extended Graphics Array, is an IBM display standard introduced in 1990. ^[1][2] Many web sites and multimedia products were re-designed from the previous 800×600 format to the higher 1024×768-optimized layout.

The availability of inexpensive LCD monitors has made the 5:4 aspect ratio resolution of 1280×1024 more popular for desktop usage. Many computer users including CAD users, graphic artists and video game players run their computers at 1600×1200 resolution (UXGA, Ultra-eXtended) or higher if they have the necessary equipment. UXGA is an abbreviation for Ultra eXtended Graphics Array referring to a standard monitor resolution of 1600 × 1200 Pixels which is exactly Other recently available resolutions include oversize aspects like 1400×1050 SXGA+ and wide aspects like 1280×720 WXGA, 1680×1050 WSXGA+, and 1920×1200 WUXGA. SXGA+ stands for Super eXtended Graphics Array Plus and is a Computer display standard. Comparison chart WQUXGA display - 3840 x 2400 pixels (commercially available since Nov 2007 WSXGA+ stands for W idescreen S uper e' X' tended G raphics A rray and is a Computer display standard. WUXGA stands for Widescreen Ultra eXtended Graphics Array and is a Display resolution of 1920×1200 Pixels (2304000 pixels with a 1610 screen The most common computer display resolutions are as follows^[3]:

When a computer display resolution is set higher than the physical screen resolution, some video drivers make the virtual screen scrollable over the physical screen. Most LCD manufacturers do make note of the panel's native resolution as working in a non-native resolution on LCDs will result in a poorer image, due to dropping of pixels to make the image fit (when using DVI) or insufficient sampling of the analog signal (when using VGA connector). Few CRT manufacturers will quote the true native resolution since CRTs are analog in nature and can vary their display from as low as 320×200 (emulation of older computers or game consoles) to as high as the internal board will allow, or the image becomes too detailed for the vacuum tube to recreate (i. e. analog blur). Thus CRTs provide a variability in resolution that LCDs can not provide (LCDs have fixed resolution).

Overscan and underscan

Main article: Overscan

Most television display manufacturers "overscan" the pictures on their displays (CRTs and PDPs, LCDs etc. Overscan is extra image area around the four edges of a Video image that is not normally seen by the viewer ), so that the effective on-screen picture may be reduced from 720×576(480) to 680×550(450), for example. The size of the invisible area somewhat depends on the display device. HD televisions do this as well to a similar extent.

Computer displays including projectors generally do not overscan although many models (particularly CRT displays) allow it. In computer displays, overscan and underscan can be altered by adjusting vertical blanking interval. The vertical blanking interval (VBI also known as the vertical interval or VBLANK, is the time difference between the last line of one frame or field of a Raster CRT displays tend to be underscanned in stock configurations, to compensate the increasing distortions at the corners. On LCD and other flat panel displays, VBI can be lowered to support higher resolutions and refresh rate for the same bandwidth.

Evolution of standards

The blue borders would have been in the overscan region; barely visible.

640×200 – monitor vs. television

Many personal computers introduced in the late 1970s and the 1980s were designed to use television sets as their display devices, making the resolutions dependent on the television standards in use, including PAL and NTSC. PAL, short for Phase Alternating Line, is a colour -encoding system used in Broadcast television systems in large parts of the world NTSC ( National Television System Committee) is the Analog television system used in the United States, Canada, Japan, Mexico Picture sizes were usually limited in order to ensure the visibility of all the pixels in the major television standards and the broad range of television sets with varying amounts of overscan. The actual drawable picture area was therefore somewhat smaller than the whole screen, and was usually surrounded by a static-colored border (see image to right). Also, the interlace scanning was usually omitted in order to provide more stability to the picture, effectively halving the vertical resolution in progress. 160×200, 320×200 and 640×200 on NTSC were relatively common resolutions in the era (224, 240 or 256 scanlines were also common). In the IBM PC world, these resolutions came to be used by 16-color CGA video cards. The Color Graphics Adapter ( CGA) originally also called the Color/Graphics Adapter or IBM Color/Graphics Monitor Adapter

One of the drawbacks of using a television was that the computer display resolution was higher than the TV could decode. Chroma resolution for NTSC/PAL televisions are bandwidth-limited (by specification) to a maximum 1. 5 megahertz, or approximately 160 pixels wide, which led to blurring of the color for 320 or 640-wide signals, and made text difficult to read (see second image to right). Many users upgraded to higher-quality monitors with S-video or RGBI inputs that helped eliminate chroma blur & produce more legible displays. Super Video or Separated Video abbreviated S-Video and also known as Y/C is an analog video signal that carries the video data as two separate

A 4096-color interlaced image from 1989

An example of a VGA image. Dithering is used to overcome the format's 256-color limitation.

The 640×400i resolution (720x480i with borders disabled) was first introduced by home computers such as the Commodore Amiga and (later) Atari Falcon. These computers used interlace to boost the maximum vertical resolution. These modes were only suited to graphics or gaming, as the flickering interlace made reading text in word processor, database, or spreadsheet software difficult. (Modern game consoles solve this problem by pre-filtering the 480i video to a lower resolution. For example Final Fantasy 12 suffers from flicker when the filter is turned off, but stabilizes once filtering is restored. is a Console role-playing game developed and published by Square Enix for Sony 's PlayStation 2, and the twelfth installment in the Final Fantasy The computers of the 1980s lacked sufficient power to run similar filtering software. )

The advantage of a 720×480i overscanned computer was an easy interface with interlaced TV production, leading to the development of Newtek's Video Toaster, and the use of Amigas for CGI creation in various news departments (example: weather overlays), drama programs such as NBC's seaQuest, WB's Babylon 5, and early computer-generated animation by Disney for the Little Mermaid, Beauty and the Beast, and Aladdin. The NewTek Video Toaster is a combination of hardware and software for the editing and production of standard-definition NTSC and

In the PC world, the IBM PS/2 VGA and MCGA (multi-color) on-board graphics chips used a non-interlaced (progressive) 640×480p resolution that was easier to read and thus more-useful for office work. The Personal System/2 or PS/2 was IBM 's third generation of Personal computers The PS/2 line released to the public in 1987 was created by IBM in an Multi-Color Graphics Array or Memory Controller Gate Array (MCGA was the IBM name for what would later become part of the generic Video Graphics Array (VGA standard 640×480 was the standard resolution from 1990 to around 1996. 800×600 was the standard resolution until around 2000. Today most web browsers are set to 1280x1024.

Microsoft Windows XP is designed to run at 800×600 minimum although it is possible to select 640×480 in the Advanced Settings Window, and an application is also able to switch to any desired mode. Windows XP is a family of 32-bit and 64-bit Operating systems produced by Microsoft for use on Personal computers including home and Linux, FreeBSD, and most Unix variants use the X Window System and can run at any desired resolution as long as the display and video card support it. Linux (commonly pronounced ˈlɪnəks FreeBSD is a Unix-like free Operating system descended from AT&T UNIX via the Berkeley Software Distribution (BSD branch through Unix (officially trademarked as UNIX, sometimes also written as Unix with Small caps) is a computer A display device is an Output device for presentation of Information for Visual or Tactile reception acquired stored or transmitted A video card, also known as a graphics accelerator card, display adapter, or graphics card, is a hardware component whose function is to Emulators, programs designed to mimic older hardware such as Atari, Sega, or Nintendo game consoles, when attached to multiscan CRTs, routinely use much lower resolutions such as 160x200 or 320x400 to create greater authenticity.

Commonly used

Main article: List of common resolutions

See also

• Computer display standards
• Resolution independence
• Pixels per inch
• Widescreen

References

• Sony SXRD 4K Projector (SRXR110) resolution retrieved from [1]

External links

• Online tool to check screen resolution
• Free online tools for calibrating monitor brightness, contrast, color depth and resolution.
• Online screen size calculator
• Display the resolution and color bit depth of your current monitor.
• How Many Dots Has It Got?
• Video Format Resolutions (Computer Display Formats, Cell Phone and PDA, Mini LCD Displays, Digital Cinema Formats, Video Conferencing Formats 4:3, Digital Television formats 4:3, Digital Television formats 16:9, Digital Television formats 8:3)