A dinghy is a type of small boat, often carried by a larger boat. A schooner (ˈskuːnɚ is a type of sailing vessel characterized by the use of fore-and-aft sails on two or more masts Schooners were first used by the Adventuress is a 136-foot Gaff-rigged Schooner launched in 1913 in East Boothbay, Maine. A boat is a Watercraft of modest size designed to float or plane on water and provide transport over it The term can also refer to small racing yachts or recreational open sailing boats. See also Dinghy sailing Dinghy racing is the competitive Sport of sailing dinghies. Dinghy sailing is the activity of Sailing small boats by using (1 the Sails and (2 underwater foils ( Daggerboard or Centreboard Utility dinghies are usually rowboats or have an outboard motor but they could also be rigged for sailing. With regard to Watercraft, rowing is the act of propelling a boat using the motion of Oars in the water An outboard motor is a propulsion system for smaller Boats General uses Outboard motors for a Boat are developed as a self-contained They are used for off-ship excursions from larger boats, outside of docking at suitably-sized ports or marinas. A dock (from Dutch 'dok' is a man-made feature involved in the handling of boats or ships ||-||-|-||-||-||-||-||-||-|} A port is a facility for receiving Ships and transferring cargo For other uses of this word see Marina (disambiguation. A marina is a sheltered Harbor where Boats and Yachts A small vehicle towed behind a motorhome is colloquially referred to as a dinghy. In North American English the term recreational vehicle, and its acronym RV, are generally used to refer to an enclosed piece of equipment dually used as both Because the smaller sailing dinghy responds more quickly to each maneuver whether correct or incorrect, they are more ideal for beginner training in sailing, rather than full sized sloops where an intermediate level is more appropriate. For the military definition of sloop see Sloop-of-war. For the open learning project see SLOOP Project.
Contents |
Types
Dinghies usually range in length from 2 to 6 meters. Larger auxiliary vessels are generally called tenders, pinnaces or lifeboats. A ship's tender, usually referred to as a tender, is a Boat, or a larger ship used to service a Ship, generally by transporting people and/or supplies A pinnace is one of two marine craft the first a small vessel used as a tender to larger vessels amongst other things and the second a ship rigged vessel popular in northern waters through A lifeboat is a small craft carried on a ship to provide a means of emergency evacuation in the event of a disaster aboard the ship Folding and take-down multi-piece dinghies are also used where space is limited. Some newer dinghies have much greater buoyancy and have great carrying capacity relative to length of the boat.
Modern dinghies are typically made of glass-fiber reinforced polyester (GRP) because it requires the least care and does not rot. Glass-reinforced plastic ( GRP) is a Composite material or Fiber-reinforced plastic made of a Plastic reinforced by fine fibers Water penetrating the outer coat can cause blistering and damage to lamination but can be prevented with a barrier coat of epoxy resin. In Chemistry, epoxy or polyepoxide is a Thermosetting Epoxide Polymer that cures (polymerizes and crosslinks when mixed with a Other materials include Aluminum, marine plywood and, with the advent of sturdy, UV resistant urethane varnishes, wood. WikipediaNaming Plywood is a type of Engineered board made from thin sheets of Wood, called plies or veneers Ultraviolet ( UV) light is Electromagnetic radiation with a Wavelength shorter than that of Visible light, but longer than X-rays Wooden dinghies built using the carvel or clinker methods, have a classic look and are easier to handle than the prefabricated craft, despite being heavier. In Boat building, carvel built or carvel planking is a method of constructing Wooden Clinker building is a method of constructing hulls of Boats and Ships by fixing Wooden planks and in the early nineteenth century Favored woods, in order of rot resistance, are locust, mahogany, fir and spruce. Black Locust ( Robinia pseudoacacia) is a Tree in the subfamily Faboideae of the pea family Fabaceae. The name mahogany is used when referring to numerous varieties of dark-colored wood originally the wood of the species Swietenia mahagoni, known as West Firs ( Abies) are a genus of between 45-55 species of Evergreen conifers in the family Pinaceae. Spruce refers to Trees of the genus Picea, a genus of about 35 species of Coniferous Evergreen trees in the Family Pinaceae Bronze and stainless steel are good materials for hardware. Bronze is any of a broad range of Copper alloys, usually with Tin as the main additive but sometimes with other elements such as Phosphorus In Metallurgy, stainless steel is defined as a Steel Alloy with a minimum of 11 Working boats may have galvanized steel to reduce the cost, but the hardware must be replaced every few years. Steel is an Alloy consisting mostly of Iron, with a Carbon content between 0
- Whaleboats are the classic premium rowboats, with a sharp bow, fine stern lines and a canoe transom. A whaleboat is a type of open Boat that is relatively narrow and pointed at both ends enabling it to move either forwards or backwards equally well In Naval architecture, a transom is the surface that forms the Stern of a vessel Despite a slight tip and less cargo capacity than prams, they row, motor and sail the best because of their fine lines. Prior to the introduction of fiberglass as a construction material, dories were more popular because their ease of assembly and, thereby, lower cost.
- Whitehall Rowboats were the water taxis of the late 1800s until the invention of the small gasoline outboard. Whitehall Rowboats are considered one of the most refined Rowboats of the 1800s Considered one of the most refined rowboats for harbor and lake use, Whitehall Rowboats are a descendant of the Captain's Gig which was used for a similar purpose on a naval vessel. The captain's gig is a Boat used on naval ships as the captain's private taxi
- Dories are sharp-ended boats made of wood, fiberglass or aluminum. For the fishes known as dories see Dory (fish. For the Greek Spear see Doru. They cut the water well, but their initial stability is low, making them feel tippy in flat water. Consequently, a loaded dory becomes more stable as more of the beam of the boat is submerged. Dories are not generally used as service boats to yachts. A dory can be landed or launched through surf where a Whitehall may flounder.
- Prams are similar to dories but are wider with transoms at both bow and stern. In Naval architecture, a transom is the surface that forms the Stern of a vessel The bow (pronounced &mdashrhymes with how) is a nautical term that refers to the forward part of the hull of a Ship or Boat, The stern is the rear or aft part of a Ship or Boat, technically defined as the area built up over the Sternpost, extending upwards from the Counter They are difficult to tip and carry a lot of cargo but are slow because of their lack of directional stability. Good photos of small prams can be seen at: [1] and [2]. The Norwegian article. A boat-builder's product description.
- Some inflatable boats, such as the Zodiac-type inflatable, have a rigid deck and transom which allows an engine to be used for propulsion. An inflatable boat is a lightweight boat constructed with its sides and bow made of flexible tubes containing pressurised gas They row poorly because of their blunt bows and large wetted surface, but they are exceptionally buoyant.
- Recently, rigid multifunction self-rescue dinghies have been introduced, challenging the idea that sitting in a liferaft and waiting for rescue is the best solution to the problem of abandoning ship. These pro-active boats are designed to row, motor, tow, and sail. In addition to their self-rescue functionality, these boats serve as everyday tenders and as recreational boats. They are extremely buoyant and/or unsinkable and have great carrying capacity relative to length.
![[2]](http://www.gartsideboats.com/pgimages/7pramvarnish.JPG){kind=link}
Space Issues
On yachts shorter than 10 meters, there is usually not enough room for a reasonably sized dinghy. Because anchorage is much less expensive than a dock or slip space, owners of small yachts compromise by carrying a small rigid dinghy or deflated inflatable, or by towing a larger dinghy. Dinghies are sometimes used as lifeboats. Any extra equipment can be stored in containers or bags that are tied to the dinghy.
Rigid dinghies for small yachts are very small (2 meters) dinghies, usually with a pram (blunt) bow to get more beam (width) in a shorter length. Larger dinghies are towed and should have reserve buoyancy, an automatic bailer, and a cover to prevent them from being lost at sea. Most masters prefer a tow cable long enough to put the dinghy on the back side of the swell to prevent the dinghy from ramming the transom of the yacht.
Inflatables are inconvenient to tow and take extra time to inflate but are very compact and fit easily into place while at sea. Some owners use a two-piece rigid dinghy that is towed while in harbor and disassembled into two nesting pieces while off-shore. There are several types of collapsable dinghy available, which are rigid-types that quickly dismantle into a series of flat panels for easy stowage.
An alternative to the traditional inflatable dinghy is the addition of inflatable tubes to an existing hard dinghy. This allows owners of traditional hard dinghies to add flotation and stability while retaining the benefits of a solid dinghy. In January 2004 Cruising World[3] published a thorough review of several dinghies including options of interest to owners.
Essential hardware
A dinghy should have a strong ring on the bow. The ring secures the painter (the line that anchors the boat to a dock), and is used for towing and anchoring. Ideally, the dinghy should also have two other rings (one on each side of the stern transom) which, with the bow ring, are used for lifting and securing the dinghy for stowage.
The only other essential pieces of hardware are oarlocks (also known as rowlocks). A rowlock (British or oarlock (US is a Brace that attaches an Oar to a boat. Conventionally, a dinghy will have an oar on each side. A single sculling oarlock on the transom is less common, but offers some flexibility requiring less space. A sculling oar moves back and forth, never leaving the water; This is the traditional oar on a sampan. A sampan ( Chinese: 舢舨 is a relatively flat bottomed Chinese wooden Boat from 3
The dinghy is generally carried inverted amidships on yachts. This keeps the yacht balanced. When the dinghy is inverted amidships, many yacht owners prefer for it to have handholds built into the bottom. These make launching easier and provide more handholds on deck.
Most yachts launch their dinghies by hand or with a simple lifting tackle rigged from the main mast. Another arrangement, davits over the transom, is convenient and elegant, but sailing in a heavy following sea could cause the loss of a dinghy. If a dinghy is towed, an extra line with a loop in the end (known as a lazy painter) can be attached to a the dinghy so that if the towing line breaks, there is a line to grab with a boat hook. This makes retrieval easier at sea, especially if the boat is partially swamped.
Dinghies often have names and numbers. On hard dinghies these are usually on the bow. On inflatables, they are on the inside of the transom.
Propulsion
Conventional dinghies are powered by rowing with one set of oarlocks for each thwart (seat). In some models, sliding thwarts allow far more powerful rowing while in others, a removable thwart can permit standing rowing. A single sculling oar with an oarlock on the rear transom can be a compact emergency oar. An oar is an implement used for water-borne propulsion. Oars have a flat blade at one end
Another popular propulsion option is an outboard motor. A horsepower per meter of length is faster than oars. Two horsepower per meter can reach hull speed. Ten horsepower per meter will put a flat-bottomed dinghy on plane. Conventionally, the gas tank is placed under the rear thwart. Engines always swing up so the dinghy can be grounded without damage. Since the transom may need to be cut down for the engine to fit properly, an engine well should be used to prevent low waves from splashing over the transom and flooding the boat.
One typical sailing rig for a dinghy is a gunter with a two-piece folding mast stepped through a thwart and resting on the keel. In Sailing, a gunter is used for two main configurations of rig The gunter is defined as a wire that leads from one point near the end of a gaff It is raised by pulling a rope. A single-sailed gaff rig is usually preferred over a marconi (with a triangular mainsail and jib) because a gaff rig is simpler and has a lower center of force. The bottom of the main sail can be untended (no boom) in order to avoid hitting the passengers with a spar. Recently, power kites have become available. A power kite or traction kite is a large kite designed to provide significant pull to the user They are more compact, help maneuver and are easier to install, but require more attention.
Traditional working dinghies have a lee board that can be hooked over the side. This does not split the cargo space. A sailing rudder is usually tied to a simple pair of pintles (hinge pins) on the transom with the bottom pintle being longer so that the rudder can be mounted one pintle at a time. The rope keeps the rudder from floating off in a wave. Both rudders and lee boards have swiveling tips so the dinghy can be landed. Rudders are often arranged so the tiller folds against the rudder to make a compact package.
Racing dinghies usually have a daggerboard or centerboard to better sail upwind. The trunk is in the middle of what would otherwise be cargo area.
Other equipment
Additional equipment that is generally considered necessary or legally required on a dinghy includes the following:
- life-jackets for every potential occupant
- a hand-bailer
- a bailing sponge
- a large torch/flashlight
- a mouth-blown horn (not a loud-hailer, but a breath-blown fog-horn)
- signal whistle
- signal mirror
- flares
This equipment should be in a bag made of water-resistant materials and tied to a thwart or stowed inside a locker.
Anderson-style self-bailers are also useful for engine-driven and sailing dinghies. These slot-shaped seacocks project into the stream below the hull and open when submerged and moving rapidly. The downside of this solution is that if the boat is beached in sand, it can clog the self-bailers until the boat is inverted and the sand removed. Additionally, these devices do not replace a hand-bailer as they are only useful if the vessel is moving at a moderate speed.
A small anchor can be used to allow the crew of the dinghy to fish or rest. Traditionally, a dinghy anchor is either a mushroom shape or a small folding grapple hook with floating rope that will avoid being cut by snags on the bottom. The mushroom is used in locations where the bottom is excessively muddy while the grapple works better in currents. Some persons prefer a small danforth or plow, the same as they would use on a larger boat, but these have sharp edges, and need to be pulled-on to set.
A dinghy should not be able to scratch the mother-boat's paint, therefore a fender made from a length of heavy rope can be tied loosely to the outside of the bulwarks. This also provides a handhold for launching, or for men overboard to climb into the boat. Many modern dinghies have a molded ridge of plastic to replace the rope. A fitted acrylic canvas cover can shed seas or act as a shade or storage cover. Traditionally it toggles to the fender-rope or is suspended from the gunter (small folding mast) but can also be tied to a few points and secured with snaps or velcro. Velcro is a brand name of fabric hook-and-loop fasteners. It consists of two layers a "hook" side which is a piece of Fabric covered with tiny hooks Depending on the design there may be a large locker under a thwart.
See also
External links
Dinghy sailing is the activity of Sailing small boats by using (1 the Sails and (2 underwater foils ( Daggerboard or Centreboard See also Dinghy sailing Dinghy racing is the competitive Sport of sailing dinghies.Dapyx Software network: MP3 Explorer | Ebook Manager | Zenithic