A critical load is defined as
”A quantitative estimate of an exposure to one or more pollutants below which significant harmful effects on specified sensitive elements of the environment do not occur according to present knowledge” (Nilsson and Grennfelt 1988)
Critical loads and the similar concept of critical levels have been used extensively within the 1979 UN-ECE Convention on Long-Range Transboundary Air Pollution. The United Nations Economic Commission for Europe (UNECE or ECE was established in 1947 to encourage economic cooperation among its member States The Convention on Long-Range Transboundary Air Pollution, often abbreviated as Air Pollution or CLRTAP, is intended to protect the human environment against Air As an example the 1999 Gothenburg protocol to the LRTAP convention takes into account acidification (of surface waters and soils), eutrophication of soils and ground-level ozone and the emissions of sulfur dioxide, ammonia, nitrogen oxide and non-methane volatile organic compounds (NMVOC). Soil acidification is the buildup of Hydrogen Cations also called Protons in the Soil. OZONE is an object oriented Operating system written in the C programming language. Ammonia is a compound with the formula N[[hydrogen H3]] It is normally encountered as a Gas with a characteristic pungent Odor The term nitrogen oxide typically refers to any Binary compound of Oxygen and Nitrogen, or to a mixture of such compounds Nitric NMVOC is the abbreviation for non-methane volatile organic compounds For acidification and eutrophication the critical loads concept was used, whereas for ground-level ozone the critical levels were used instead. In Computer science, ACID ( Atomicity Consistency Isolation Durability) is a set of properties that guarantee that Database transactions are Eutrophication is an increase in chemical Nutrients -- typically compounds containing Nitrogen or Phosphorus -- in an Ecosystem, and may occur Ozone (O3 is a key constituent of the Troposphere (it is also an important constituent of certain regions of the Stratosphere The exosphere is the uppermost layer of the atmosphere. On Earth, its lower boundary at the edge of the Thermosphere is estimated to be 500 km to
To calculate a critical load, the target ecosystem must first be defined and in that ecosystem (e. An ecosystem is a natural unit consisting of all plants animals and micro-organisms( Biotic factors in an area functioning together with all of the non-living physical ( g. a forest) a sensitive "element" must be identified (e. A forest is an area with a high density of Trees There are many definitions of a forest based on various criteria g. forest growth rate). The next step is to link the status of that element to some chemical criterion (e. g. the base cation to aluminium ratio, Bc/Al) and a critical limit (e. g. Bc/Al=1) which should not be violated. Finally, a mathematical model (e. g. the Simple Mass Balance model, SMB) needs to be created so that the deposition levels that result in the chemical criterion reaching exactly the critical limit can be calculated. That deposition level is called the critical load and the difference between the current deposition level and the critical load is called exceedance.
In the early days, critical loads were often calculated as a single value, e. g. critical load of acidity. Today a two-dimensional critical load function is often calculated, with the x-axis as N-deposition and the y-axis as S-deposition. In Mathematics, the Cartesian coordinate system (also called rectangular coordinate system) is used to determine each point uniquely in a plane The critical loads concept is a steady-state concept and that it therefore includes no information whatsoever regarding how long it takes before e. Steady state is a more general situation than Dynamic equilibrium. g. effects are visible. A simplified illustration of dynamic aspects is the target load function, which is the load at which the chemical criterion recovers before a chosen year, the target year. Thus, for target years in the near future the target load function is lower than the critical load and for target years in the distant future the target load function approaches the critical load function.
Calculating critical load functions and target load functions include several simplifications and thus can be viewed as a risk concept: The higher the exceedance the higher the risk for adverse effects and there is a certain risk that zero exceedance will still lead to adverse effects.
For more information relating definitions and use of these concepts, see the online publications at http://www.mnp.nl/cce/
Dapyx Software network: MP3 Explorer | Ebook Manager | Zenithic