A concrete mixer (also commonly called a cement mixer) is a device that homogeneously combines cement, aggregate such as sand or gravel, and water to form concrete. In the most general sense of the word a cement is a binder a substance which sets and hardens independently and can bind other materials together Aggregate is the component of a Composite material used to resist compressive stress Water is a common Chemical substance that is essential for the survival of all known forms of Life. Concrete is a construction material composed of Cement (commonly Portland cement) as well as other cementitious materials such as Fly ash and Slag A typical concrete mixer uses a revolving drum to mix the components. For smaller volume works portable concrete mixers are often used so that the concrete can be made at the construction site, giving the workers ample time to use the concrete before it hardens. An alternative to a machine is mixing concrete or cement by hand. This is usually done in a wheelbarrow; however, several companies have recently begun to sell modified tarps for this purpose. A tarpaulin or tarp is a large sheet of strong flexible Water resistant or Waterproof material often Cloth such as Canvas or polyester
Contents |
Industrial mixers
Today's market increasingly requires consistent homogeneity and short mixing times for the industrial production of ready-mix concrete, and more so for precast/prestressed concrete. This has resulted in new technologies for concrete production. Worldwide, therefore, twin-shaft batch mixers are becoming more important for high-quality concrete production. They introduce very high turbulence into the mix and achieve about 95% homogeneity at only around 30 seconds mixing time per batch.
Concrete transport truck
Special concrete transport trucks (in–transit mixers) are made to transport and mix concrete from a factory/plant to the construction yard. This article is about the semi-truck For the North American use of the word see Pickup truck. They are charged with dry materials and water, with the mixing occurring during transport. (Although, more modern plants load the truck with 'Ready Mixed' concrete. With this process, the material has already been mixed, and then is loaded into the truck. The ready mix truck maintains the material's liquid state, through agitation, or turning of the drum, until delivery. ) The interior of the drum on a concrete truck is fitted with a spiral blade. In Mathematics, a spiral is a Curve which emanates from a central point getting progressively farther away as it revolves around the point A blade is the flat part of a Tool, Weapon, or Machine (such as a fan) that normally has a cutting edge and/or pointed end typically made In one rotational direction, the concrete is pushed deeper into the drum. This is the direction the drum is rotated while the concrete is being transported to the building site. This is known as "charging" the mixer. When the drum rotates in the other direction, the Archimedes screw-type arrangement "discharges", or forces the concrete out of the drum. The Archimedes' screw, Archimedean screw, or screwpump is a Machine historically used for transferring water from a low-lying body of water into Irrigation From there it may go onto chutes to guide the viscous concrete directly to the job site. If the truck cannot get close enough to the site to use the chutes, the concrete may be discharged into a concrete pump connected to a flexible hose, or onto with a conveyor belt which can be extended some distance (typically ten meters). A concrete pump is a tool for transferring liquid Concrete by Pumping There are two main classifications of concrete pumps A belt conveyor consists of two or more Pulleys with a continuous loop of material - the conveyor belt - that rotates about them A pump provides the means to move the material to precise locations, multi-floor buildings, and other distance prohibitive locations.
"Rear discharge" trucks require both a driver and a "chuteman" to guide the truck and chute back and forth to place concrete in the manner suitable to the contractor. Newer "front discharge" trucks have controls inside the cab of the truck to allow the driver to move the chute in all directions. The first front discharge mixer was designed and built by Royal W. Sims of Holiday, Utah.
A six-axle truck has three "lift axles" -- the first two axles behind the cab (the pusher axles) and the rear-most axle (the tag axle) -- which can be lifted out of the way for off-road operation. When loaded, these axles distribute the weight of the truck. This distribution of weight is essential. Otherwise, roads most traveled on by vehicles of this size begin to break down. As an added benefit, these axles provide the driver better control of the vehicle during transport. The lift axles are equipped with brakes, and a system that lets them actually turn with the truck during turns, allowing maneuvering that would otherwise be nearly impossible.
Concrete mixers generally do not travel far from their plant, as many contractors require that the concrete be in place within 90 minutes after loading. If the truck breaks down or for some other reason the concrete hardens in the truck, workers need to enter the barrel with jackhammers; dynamite is still occasionally used to break up hardened concrete in the barrel under certain circumstances.
Stephen Stepanian filed a patent application for the first truck mixer in 1916. Year 1916 ( MCMXVI) was a Leap year starting on Saturday (link will display the full calendar of the Gregorian calendar (or a Leap year [1] Trucks weigh 20–30,000 pounds (9–13. 5 tonnes), and can carry roughly 40,000 pounds (18 tonnes) of concrete although many varying sizes of Mixer Truck are currently in use. This article is about the tonne or metric ton For other tons see Ton. The most common truck capacity is six cubic metre.
Most concrete mixers in the UK are limited to a speed of 56 miles per hour.
Television
An episode of MythBusters checks if dynamite can be used to clean out hardened concrete from inside of a mixer truck. MythBusters is a Popular science Television program produced by Australian firm Beyond Television Productions originally for the Dynamite is an explosive based on the explosive potential of Nitroglycerin, initially using Diatomaceous earth (kieselgur US Spelling kieselguhr It is concluded that it can be of limited use. For the finale, an excessive amount of explosive (800 lbs of commercial blasting agent) is used, and is detonated from a very, very long distance away. Only the engine block is recovered. The explosion left a very clear crater.
In an 5th season episode 1 of TV series MacGyver, the series's main character uses an engine from a small portable gasoline powered cement mixer, in order to build an airplane[2]
In Fiction
- In Thomas and Friends, Patrick is a concrete mixer who is dark red and seen in On Site with Thomas before Jector in Thomas, Ten Cents and Jector. Jack and the Pack is a direct-to-video release of the series Thomas and Friends.
- Bob the Builder - Dizzy is an orange concrete mixer. Bob the Builder is a Children's television character created by Keith Chapman.
References
- ^ Portland Cement Association: History of Ready Mixed Concrete industry site
- ^ "MacGyver" Legend of the Holy Rose: Part 1 (1989)