A-004 - Citizendia

**A-004 Apollo Launch Escape System Test**
Mission Insignia

Mission Statistics
Mission Name:	A-004
Call Sign:	A-004
Launch:	January 20, 1966 15:17:01 UTC White Sands Missile Range Launch Complex 36
Landing:	January 20, 1966 15:23:51 UTC
Duration:	6 min 50 s
Number of Orbits:	Suborbital
Apogee:	14. Events 250 - Emperor Decius begins a widespread persecution of Christians in Rome. Year 1966 ( MCMLXVI) was a Common year starting on Saturday (link will display full calendar of the 1966 Gregorian calendar. White Sands Missile Range (WSMR is a Rocket range of almost area the largest military installation in the United States Events 250 - Emperor Decius begins a widespread persecution of Christians in Rome. Year 1966 ( MCMLXVI) was a Common year starting on Saturday (link will display full calendar of the 1966 Gregorian calendar. A sub-orbital spaceflight (or sub-orbital flight is a Spaceflight in which the Spacecraft reaches space, but its Trajectory intersects 81 mi - 23. 83 km
Distance Traveled:	21. 52 mi - 34. 63 km
A-004

Little Joe II A-004, White Sands, NM (NASA)

A-004 was the sixth and final abort test of the Apollo spacecraft.

Objectives

Mission A-004 was the final test of the Apollo launch escape vehicle and the first flight of a Block I production-type spacecraft. The mission was unmanned and was conducted to demonstrate that (1) the launch escape vehicle would satisfactorily orient and stabilize itself in the proper attitude after being subjected to a high rate of tumbling during the powered phase of an abort and (2) the escape vehicle would maintain its structural integrity under test conditions in which the command module structure was loaded to the design limit.

The launch vehicle was the fifth and final Little Joe II flown. Little Joe II program From August 1963 to January 1966, a series of unmanned flight tests were conducted at the White Sands Missile Range to demonstrate The propulsion system consisted of four Algol and five Recruit rocket motors. The attitude control system was similar to the one used on mission A-003 except that the reaction control system was deleted and the vehicle was provided with the capability of responding to a radio-transmitted pitch up command. The pitch up maneuver was required to help initiate tumbling of the launch vehicle. The spacecraft for this mission consisted of a modified Block I command and service module boilerplate and a modified Block I launch escape system (airframe 002). A Launch Escape System (LES is a top-mounted Rocket connected to the crew module of a crewed spacecraft and used to quickly separate the crew module from the rest of the The center of gravity and thrust vector were changed to assure that power-on tumbling would be attained after abort initiation. The earth landing system was essentially the same as that used during Pad Abort Test 2.

Flight

The vehicle was launched on January 20, 1966, at 08:17:01 a. m. M. S. T. (15:17:01 UTC) after several postponements due to technical difficulties and adverse weather conditions. The pitchup maneuver was commanded from the ground when telemetry showed that the desired altitude and velocity conditions had been reached. The planned abort was automatically initiated 2. 9 seconds later. The launch escape vehicle tumbled immediately after abort initiation. Pitch and yaw rates reached peak values of 160 degrees per second, and roll rates reached a peak of minus 70 degrees per second. The launch escape system canard surfaces deployed at the proper time and stabilized the command module with the aft heat shield forward after the escape vehicle had tumbled about four times. Tower jettison and operation of the earth landing systems were normal, and the command module landed about 113,620 feet (34. 6 km) from the launch pad after having reached a maximum altitude of 78,180 feet (23. 8 km) above mean sea level.

All systems performed satisfactorily, and the dynamic loads and structural response values were within the design limits and predicted values. Although a structural loading value of primary interest was not achieved (local differential pressure between the interior and exterior of the command module wall), all test objectives were satisfied.

External links

© 2009 citizendia.org; parts available under the terms of GNU Free Documentation License, from http://en.wikipedia.org
network: | |